Supports a compact vertical VersaMax I/O assembly without a separate large terminal base.
Technical Summary
IC200CHS022P is an Emerson VersaMax compact I/O carrier in the box-style vertical carrier family. It provides the mechanical and electrical interface between a VersaMax I/O module and the modular I/O assembly.
The final P is part of the supplied hardware identity. Replacement selection must use the full IC200CHS022P label, because the family code IC200CHS022 alone does not preserve the installed revision.
Specifications
| Manufacturer | Emerson |
|---|---|
| Exact Model | IC200CHS022P |
| Product Family | VersaMax Modular I/O |
| Product Type | Compact I/O carrier |
| Carrier Style | Box-style vertical I/O carrier |
| Installed Role | Mechanical and electrical interface for a VersaMax I/O module |
| Revision Identity | P suffix; retain exactly from the installed label |
| Selection Basis | Exact carrier label, module type, mounting arrangement and wiring |
Features
Provides the carrier interface used by the installed I/O module and field connections.
Keeps module position and field wiring associated with one identifiable carrier location.
Uses a visible revision suffix that can be captured during maintenance and procurement.
Compatibility
- Confirm IC200CHS022P on the carrier label rather than selecting only from the IC200CHS022 family code.
- Record the installed VersaMax I/O module, adjacent modules and physical mounting orientation.
- Photograph terminal numbering and conductor tags before moving field wiring.
- Check keying, connector condition and available panel clearance before installation.
Replacement
- Isolate field power and follow the machine lockout procedure before disturbing the carrier.
- Save controller and I/O configuration, then label every conductor and the module position.
- Inspect the mating connector and mounting hardware for bent contacts, contamination or strain.
- Install the exact carrier revision, refit the module without force and restore wiring by terminal record.
- Power up under control, confirm module diagnostics and prove every affected field point.
FAQ
Can IC200CHS022 replace IC200CHS022P without checking the suffix?
Do not assume that it can. The P suffix is part of the installed hardware identity and should be matched or covered by an Emerson-approved supersession.
What photographs are useful when sourcing IC200CHS022P?
Provide the full carrier label, installed module, terminal face, mounting orientation and adjacent-slot view.
Should the I/O module be ordered together with IC200CHS022P?
Only when the module is also required; the carrier and I/O module are separate service identities, so the enquiry should state the requested scope.
What must be preserved before moving wiring from IC200CHS022P?
Keep terminal numbers, conductor tags, shield treatment, field supply grouping and the controller I/O map.
How is a replacement IC200CHS022P accepted?
Confirm normal module diagnostics and prove each affected input or output from the field device through the controller logic.
About IndustryParts
https://www.industryparts.com/Compact carrier identity stays visible
IndustryParts records IC200CHS022P by its complete P revision, carrier format and module position before supply.
- P suffix retained
- Carrier style checked
- Wiring position documented
Recommended Models
| FIP-XHI11 | RN221N-B1 | K21R 90L 6H TPM140 FDS/5248 |
| Fermax 7376 | 14MC-0110-3S25A10-SC | SRS100/35 10100150 |
| AE1036.500 | ACU-485CNV-U | NTC20KOhm |
| BZME1-A50-BT | PT-SFP-GE-L | P11096 |
| Schneider NSYCR100WU2C | OT100P79 D/G18P1 PS1017071D | T6634-TE22-9JS0 |
| PAD-250e/L | Crestron ST-SPL 6500474 | MXS12-50 |
| 7E.56.8.400.0010 | 95A04-1 | STW 0115-12/X2-40/V R900572052 |
| X20CP3685 | 606000-40 | NT50-DN-EN |
| CPX-M-FB33 | WAGO 750-468 | LM10-230V |
| AMG 2161 | WAGO 790-108 | F520 |
