Executes the VersaMax application with configurable memory and floating-point support.
Product Overview
IC200CPUE05-CF is the CF hardware execution of the VersaMax CPUE05 controller. The complete suffix remains part of the installed and procurement identity.
Emerson documents system flash and battery-backed RAM, configurable user memory, floating-point support, two serial interfaces and an embedded 10 Mbps Ethernet interface for the CPUE05 base model.
A replacement should preserve the controller project, firmware, network identity, serial-port modes and the complete CF label rather than treating the unit as a generic Ethernet CPU.
Technical Specifications
ManufacturerEmerson / legacy GE Fanuc
Exact modelIC200CPUE05-CF
PlatformVersaMax
Product typeController with embedded Ethernet
Configurable memoryUp to 64 Kbytes
Program storageSystem flash and battery-backed RAM
Floating pointSupported
Typical Boolean execution0.8 ms/K
CommunicationsRS-232, RS-485 and Ethernet
EthernetRJ-45 UTP; 10 Mbps; half- or full-duplex
SRTP server connections8
Configured EGD exchanges32
Power demand220 mA at 5 V; 570 mA at 3.3 V
Dimensions126 × 128 × 69.1 mm
Hardware identityCF revision
Features
Combines Ethernet networking with two embedded serial communication paths.
Supports the documented SRTP, EGD and network-time functions of the CPUE05 base controller.
Keeps the CF hardware suffix linked to firmware, project and acceptance records.
Applications
- Standalone VersaMax machine and process control.
- Ethernet-connected systems using documented SRTP or EGD architectures.
- Legacy replacements where the original project and port configuration are available.
- Revision-controlled spares for installed IC200CPUE05-CF controllers.
Installation
- Export the complete project and record firmware, CPU status, Ethernet settings and serial-port modes.
- Record the CF label, carrier, power supply, connected devices and battery condition before removal.
- Verify programming-software and firmware compatibility before loading the replacement.
- Test local I/O, Ethernet, both serial paths, clock functions, alarms and approved restart behavior.
About IndustryParts
https://www.industryparts.com/The CF revision stays linked to the controller project
IndustryParts handles IC200CPUE05-CF with its firmware, project archive and every active communication path.
- CF suffix retained
- Project backup requested
- Network and serial settings recorded
Related Models
FAQ
What should accompany an IC200CPUE05-CF enquiry?
Send the complete CPU label, rack and power-supply models, firmware, project-software release, network settings, serial-port use, quantity and destination.
Can another IC200CPUE05 suffix replace IC200CPUE05-CF automatically?
No automatic interchange should be assumed. Compare Emerson revision information, firmware support, memory content and the installed project.
How should an IC200CPUE05-CF project be protected before service?
Retain the controller project, hardware configuration, Ethernet parameters, serial settings and a verified recovery copy outside the machine.
What storage check matters for a spare IC200CPUE05-CF?
Inspect the battery condition, preserve connector protection and keep the unit in dry ESD-safe storage with its identity record.
What proves IC200CPUE05-CF is ready for service?
Confirm the CF label, clean diagnostics, correct program execution, stable I/O and communications, clock behavior and an approved safe restart.
