Emerson IC200CPUE05-CG CPUE05 Controller with Ethernet, Revision CG
A VersaMax controller with serial communications and an embedded 10 Mbps Ethernet interface.
Key Information
IC200CPUE05-CG is the CG-revision identity of Emerson IC200CPUE05. The controller combines VersaMax application execution with RS-232, RS-485 and a 10 Mbps half/full-duplex Ethernet interface.
Emerson lists battery-backed RAM and system flash program storage, a 64 KB maximum configurable memory allocation and floating-point support. The Ethernet interface supports eight SRTP server connections plus configured EGD exchanges.
The CG suffix is preserved as the exact installed release. Firmware, memory allocation and protocol use must be confirmed from the controller and project rather than inferred from the suffix alone.
Functions
Control execution
Runs the VersaMax control program and updates local or networked I/O.
Embedded Ethernet
Provides an RJ45 10 Mbps path for supported SRTP, EGD, NTP and station-manager services.
Serial integration
Retains RS-232 and RS-485 communications for configured devices and maintenance paths.
Program retention
Uses battery-backed RAM and system flash to maintain the approved application record.
Specifications
- Manufacturer
- Emerson
- Exact model
- IC200CPUE05-CG
- Controller
- VersaMax CPUE05
- Installed revision
- CG
- Maximum configurable memory
- 64 KB
- Program storage
- System flash and battery-backed RAM
- Ethernet
- 10 Mbps, half/full duplex, RJ45
- SRTP server connections
- 8
- EGD configuration exchanges
- 32
- Data ranges per exchange
- 100
- Maximum data per exchange
- 1400 bytes
- Serial interfaces
- RS-232 and RS-485
- Boolean execution
- 0.8 ms/K typical
About IndustryParts
https://www.industryparts.com/Exact-model handling for IC200CPUE05-CG
IndustryParts keeps the complete model label, requested quantity, application evidence and delivery requirements together so the proposed supply can be checked against the installed system before dispatch.
Installation
Freeze the controller baseline
Save program, memory allocation, firmware, port settings, IP configuration, EGD exchanges and fault tables.
Match revision and interfaces
Compare the CG label, rack power, serial wiring, Ethernet topology and software support before exchange.
Recover under supervision
Restore the approved application, validate I/O and communications, then complete a controlled restart and retention test.
Lifecycle
Backup custody
Keep a readable project and firmware record independent of the installed CPU.
Network governance
Document enabled services, addresses and EGD relationships before any maintenance window.
Battery and clock review
Include memory retention and real-time-clock behavior in planned service checks.
Related Models
FAQ
Which files should accompany a IC200CPUE05-CG enquiry?
Provide the project archive, firmware version, memory allocation, network export, serial-port settings, rack list and complete CPU label.
How many SRTP server connections does IC200CPUE05-CG support?
Emerson publishes eight server connections for the embedded Ethernet interface.
What must be reviewed before another CPUE05 suffix replaces IC200CPUE05-CG?
Compare hardware and firmware releases, memory retention, protocol behavior and software compatibility before approval.
Why should EGD configuration be captured for IC200CPUE05-CG?
The controller can hold 32 configured exchanges with multiple ranges; those relationships affect network recovery after replacement.
How is IC200CPUE05-CG accepted after service?
Verify program checksum, retained data, real-time clock, serial links, Ethernet exchanges, I/O response and supervised restart.
