Executes Boolean logic at a typical 0.8 ms per K of instructions.
Product Overview
IC200CPUE05-MX is the MX-revision execution of the IC200CPUE05 VersaMax controller. Emerson identifies the base CPU with Ethernet, RS-232 and RS-485 communications, system flash and battery-backed RAM.
Controller replacement requires a validated program, hardware configuration, network settings, retained data plan and firmware comparison. The MX suffix must remain attached to the spare record.
Performance
Provides Ethernet communication at 10 Mbps in half- or full-duplex operation.
Supports eight SRTP server connections and configuration-based EGD exchanges.
Provides RS-232 and RS-485 serial interfaces for programming or configured communications.
Technical Details
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Exact model | IC200CPUE05-MX |
| Base catalog number | IC200CPUE05 |
| Product family | VersaMax |
| Product type | CPU with Ethernet interfaces |
| Dimensions | 126 x 128 x 69.1 mm |
| Program storage | System flash and battery-backed RAM |
| Configurable memory | 64 Kbytes maximum |
| Embedded communications | RS-232, RS-485 and Ethernet |
| Ethernet | 10 Mbps; RJ-45 UTP; half or full duplex |
| SRTP server connections | 8 |
| EGD configuration-based exchanges | 32 |
| Boolean execution | 0.8 ms/K typical |
| Power requirement | 5 V at 220 mA; 3.3 V at 570 mA |
| Hardware revision | MX |
System Integration
- Create and verify backups of the application, hardware configuration, reference tables and Ethernet settings.
- Record IP address, subnet, gateway, EGD exchanges, SRTP clients and both serial-port assignments.
- Compare firmware and MX hardware identity with the approved project before downloading or restoring retained data.
- Commission communications one path at a time and check the complete I/O station after the controller enters run mode.
Applications
- Compact machine and process control using VersaMax local or expanded I/O.
- Ethernet-connected controller nodes using SRTP or configuration-based Ethernet Global Data.
- Installations that combine Ethernet networking with RS-232 or RS-485 serial devices.
FAQ
What backup package is needed before replacing IC200CPUE05-MX?
Save the application, hardware configuration, firmware record, reference tables, Ethernet settings, EGD configuration and serial-port parameters.
Can IC200CPUE05-MX be assigned the old IP address immediately?
First isolate the old controller and confirm the network plan so two devices never use the same address.
How should the MX suffix be treated on IC200CPUE05-MX?
Retain it as part of the exact hardware identity and check site qualification, firmware compatibility and spare-control records.
What battery-backed information needs special handling on IC200CPUE05-MX?
Identify retained registers, clock-dependent functions and application start-up behavior, then plan how values will be restored or initialized.
What acceptance test should follow IC200CPUE05-MX replacement?
Verify run state, I/O health, SRTP and EGD traffic, both serial paths, retained values and a controlled machine or process cycle.
About IndustryParts
https://www.industryparts.com/Controller supply includes the configuration boundary
IndustryParts prepares IC200CPUE05-MX enquiries with the MX label, firmware, program and network records treated as one package.
- MX identity preserved
- Program evidence reviewed
- Network settings archived
Recommended Models
| Omron NX701-Z600 HMC-SD1A1 | BRH0572P01F2A | Allen Bradley 1771-IC |
| ABB TU582-S-XC 1SAP481200B0001 | 20AD-DB1-B | A5E00304764 |
| BFK458-06N 00530127 | ABB LK/S4.1 | ABB M2BAX 200MLB 6 IMB3/IM1001 |
| OO5004 | ZH0A180S017165J | Siemens 6AV7875-1BE32-1AC0 |
| Siemens 6GT2821-2AC10 | AE49938 152394-1 | AI-520 |
| WTR1-P421S08 | EL4034 | 7700DA-HD |
| NBB20-L2-A2-V1 187548 | DEH11B | RMK-16R-DV-B |
| FRMC2000 | 3RU1146-4LB0 | 5203000001 |
| 2CDG 110 062 R0011 | 0-52862 | Siemens 7MF1565-5BA00-2AA1 |
| Siemens 2KJ3508-5CA07-0CU1-Z | MC55A0 MC55A0-P40SWQQA9WR | 616102R5Z31002M |
