Emerson IC200ERM002H Non-Isolated Expansion Receiver, Revision H
A VersaMax expansion receiver for a documented short-distance expansion-bus segment.
Key Information
IC200ERM002H preserves the H-revision identity of the IC200ERM002 VersaMax I/O expansion receiver. Emerson classifies the base module as non-isolated and publishes a maximum expansion distance of 15 m.
The receiver belongs to an expansion-bus topology rather than an Ethernet network. Emerson documentation also notes support with the VersaMax PROFINET Scanner; controller, transmitter and cable identities must therefore be checked as one system.
No suffix-specific electrical change is inferred from H without a matching manufacturer revision notice. The suffix remains part of procurement, receipt and service records.
Functions
Expansion-bus reception
Receives the documented VersaMax expansion connection for the downstream I/O station.
Short-distance topology
Supports the non-isolated bus arrangement within the published 15 m boundary.
Rack identity transfer
Maintains the physical expansion-node relationship required by the configured system.
Revision traceability
Keeps the H marking visible so the installed hardware record is not reduced to the base catalog alone.
Specifications
- Manufacturer
- Emerson
- Exact model
- IC200ERM002H
- Product family
- VersaMax I/O
- Base catalog
- IC200ERM002
- Hardware role
- I/O Expansion Receiver
- Electrical architecture
- Non-isolated
- Published distance
- Up to 15 m
- Installed revision
- H
- Supported context
- VersaMax expansion; PROFINET Scanner support noted
- Selection boundary
- Receiver, expansion cable and host topology
About IndustryParts
https://www.industryparts.com/Exact-model handling for IC200ERM002H
IndustryParts keeps the complete model label, requested quantity, application evidence and delivery requirements together so the proposed supply can be checked against the installed system before dispatch.
Installation
Map the expansion chain
Record the upstream interface, receiver position, cable route, downstream modules and system power arrangement.
Confirm the short bus path
Measure the installed route and inspect connectors before accepting it against the 15 m non-isolated limit.
Restore node communication
After fitting, verify module recognition, I/O exchange and diagnostics for every downstream point.
Lifecycle
Label retention
Keep the complete IC200ERM002H revision on the spare and service report.
Cable inspection
Check connector retention, routing and noise exposure whenever the expansion node is serviced.
Topology proof
Archive the final rack map and controller diagnostic record after a controlled restart.
Related Models
FAQ
What topology evidence should accompany a IC200ERM002H request?
Send the upstream module identity, expansion cable part number and length, node order, PNS or controller record and complete receiver label.
Is IC200ERM002H an isolated expansion receiver?
No. Emerson identifies IC200ERM002 as the non-isolated receiver with a published distance up to 15 m.
Can the H suffix be omitted from an order for IC200ERM002H?
It should be retained because it identifies the installed revision even when no suffix-specific electrical change has been confirmed.
What distinguishes IC200ERM002H from a network interface?
It receives the VersaMax expansion bus; it is not a general Ethernet communications module.
How should IC200ERM002H be tested after replacement?
Confirm rack recognition, stable downstream I/O, expected diagnostics and recovery through the approved power-cycle sequence.
