Switches 32 compatible sourcing DC loads from the VersaMax I/O station.
Key Information
IC200MDL750L is a VersaMax modular I/O output module for 32 positive-logic DC loads. The outputs are arranged as two groups of sixteen for field-power distribution.
The L suffix is part of the installed label and must remain attached to the replacement record. Carrier, terminal base, group supplies and load characteristics should be reviewed before ordering.
Functions
Organizes output wiring into two independently supplied groups of sixteen.
Provides point-status indication for commissioning and maintenance checks.
Uses the compact VersaMax carrier system for local or distributed I/O construction.
Specifications
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Exact model | IC200MDL750L |
| Platform | VersaMax Modular I/O |
| Module function | DC positive-logic discrete output |
| Output count | 32 points |
| Output grouping | Two groups of sixteen |
| Rated voltage | 12/24 VDC |
| Output rating | 0.5 A per point |
| Mechanical interface | VersaMax carrier and compatible terminal base |
| Hardware revision | L |
Installation
- Record both group supplies, commons, load types and terminal numbering before removing the installed module.
- Inspect the carrier and terminal-base contacts, then fit the module without forcing the mating interfaces.
- Confirm the controller hardware configuration and 32-point output map before applying load power.
- Commission one output at a time while measuring actual steady and inrush current at the connected load.
Lifecycle
- Keep the L suffix, carrier identity and terminal-base style in the spare record.
- Investigate missing field voltage, group common, shorted loads and suppression before condemning the module.
- Record representative load-current readings after commissioning for future fault comparison.
About IndustryParts
https://www.industryparts.com/Output loading and revision evidence stay visible
IndustryParts prepares IC200MDL750L enquiries with the L suffix, carrier, group supplies and real load behavior documented.
- L revision preserved
- Two groups mapped
- Load evidence reviewed
FAQ
What load information is needed before quoting IC200MDL750L?
Provide the load voltage, steady current, inrush profile, duty cycle, suppression method and the two group-supply arrangements.
Can IC200MDL750L replace another IC200MDL750 suffix automatically?
Do not rely on the shared base number alone; confirm the L revision, carrier, terminal system and any site qualification for the installed hardware.
How should suspected multi-point failure on IC200MDL750L be investigated?
Check the affected group supply and common, external protection, connector condition and field wiring before replacing the module.
Does IC200MDL750L require a new terminal base?
Not automatically. Confirm the existing VersaMax carrier and terminal-base compatibility and inspect both mating surfaces before reuse.
What acceptance test should follow IC200MDL750L installation?
Verify station recognition, inhibit unintended loads, then exercise representative points in both groups while checking current and actuator response.
