Emerson IC200PBI001-MH VersaMax PROFIBUS-DP Network Interface Unit
A VersaMax remote-I/O network interface unit for PROFIBUS-DP, with the complete MH hardware execution retained.
Product Identification
IC200PBI001-MH is the MH hardware execution of the Emerson VersaMax IC200PBI001 PROFIBUS-DP network interface unit. It connects a VersaMax remote I/O station to a PROFIBUS-DP master.
The module is not the same as the IC200BEM002 CPU-system PROFIBUS slave module. Station address, baud-rate behavior, GSD/project identity, attached I/O layout and power budget must all stay with the NIU replacement record.
The MH suffix and the IC200PBI001 base number identify the remote-I/O NIU, not a CPU-system communication module.
Engineering Data
- Product family
- VersaMax modular I/O
- Base catalog number
- IC200PBI001
- Exact execution
- MH
- Network
- PROFIBUS-DP
- System role
- Remote I/O network interface unit
- Station hardware
- VersaMax carriers and supported I/O modules
- Engineering evidence
- Master project, GSD identity and station address
- Physical evidence
- Bus connectors, termination and complete station layout
Functions
Connect remote I/O to PROFIBUS
Exchanges cyclic station data with the configured DP master.
Coordinate the VersaMax station
Provides the network-side interface for the attached carrier and I/O layout.
Expose station diagnostics
Returns network and module information for commissioning and fault isolation.
Applications
Distributed machine I/O
Use where a PROFIBUS-DP master controls a documented VersaMax remote station.
Legacy network maintenance
Preserve address, bus segment and master configuration during replacement.
Controlled station expansion
Check supported I/O, power budget and project data before altering the module chain.
Lifecycle
Map
Record IC200PBI001-MH, station address, master identity, bus connector and full I/O order.
Archive
Save the PROFIBUS master project, GSD/device record and station data lengths.
Exchange
Preserve termination, shield bonding, address settings and the VersaMax module sequence.
Commission
Verify bus status, station diagnostics and every configured input and output point.
About IndustryParts
https://www.industryparts.com/Controlled handling for IC200PBI001-MH
IndustryParts keeps the submitted IC200PBI001-MH identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
FAQ
Is IC200PBI001-MH the same as IC200BEM002?
No. IC200PBI001 is the remote-I/O PROFIBUS-DP NIU; BEM002 is a CPU-system network communication module.
What should accompany a IC200PBI001-MH quotation?
Provide the MH label, station address, bus connector, master project and complete VersaMax I/O sequence.
Why is PROFIBUS termination important for IC200PBI001-MH?
The station must remain correctly positioned within a terminated and shielded bus segment.
Can the station layout be changed during a IC200PBI001-MH swap?
Avoid combining changes; first restore the documented module order and project configuration.
What closes a IC200PBI001-MH replacement record?
Confirm stable PROFIBUS communication, correct station diagnostics and verified operation of every configured I/O point.
