Emerson IC200PNS002-AB VersaMax PROFINET Scanner
A revision-specific scanner that connects a VersaMax remote I/O node to a PROFINET IO controller.
Overview
IC200PNS002-AB is the AB hardware revision of the VersaMax PROFINET Network Interface Unit identified in Emerson product literature as the fiber version with two ST Ethernet connectors. It interfaces a remote node of VersaMax modules to a PROFINET IO controller.
The scanner is the network head of the I/O station. Replacement therefore depends on the complete IC200PNS002-AB identity, the installed carrier and power arrangement, the exact module sequence, the fiber path and the controller project.
Specs
| Manufacturer | Emerson / GE Intelligent Platforms |
|---|---|
| Exact Model | IC200PNS002-AB |
| Product Family | VersaMax Modular I/O |
| Product Type | PROFINET Network Interface Unit / scanner |
| Network Medium | Fiber Ethernet |
| Network Connectors | Two ST connectors |
| System Role | Interfaces a remote VersaMax I/O node to a PROFINET IO controller |
| Revision | AB |
| Configuration Record | Device name, IP parameters and controller hardware project |
| Node Record | Carrier, power supply and complete left-to-right VersaMax module order |
| Fiber Record | Transmit/receive polarity, connector condition and link path |
| Replacement Boundary | Do not substitute a copper-port scanner without redesigning the physical network |
Features
Two ST fiber connectors for the documented PROFINET station link.
Compact VersaMax node interface for modular remote I/O.
AB revision retained in the supply and commissioning record.
Network and I/O configuration treated as one controlled node baseline.
Applications
- Fiber-linked VersaMax remote I/O stations in industrial control systems.
- Distributed machine I/O where electrical isolation or extended fiber routing is part of the design.
- Like-for-like maintenance of an existing IC200PNS002-AB station.
Lifecycle
- Export the controller hardware configuration and record the station name, IP settings and diagnostic state.
- Photograph both ST connections, fiber polarity, power wiring, carrier and every VersaMax module position.
- Inspect and clean fiber connectors using the approved procedure; do not look into an energized fiber port.
- After replacement, confirm link status, controller ownership, module discovery, I/O exchange and every safety-relevant interlock.
FAQ
What prevents a copper scanner from replacing IC200PNS002-AB?
The installed node uses ST fiber interfaces; a copper version changes the media, connectors and network engineering and is not a like-for-like exchange.
What information is needed to quote IC200PNS002-AB accurately?
Include the AB label, carrier and power-supply labels, complete I/O order, controller type, device name and photographs of both fiber connectors.
Why can IC200PNS002-AB show link but still fail to exchange I/O?
The physical link may be healthy while the PROFINET device name, controller assignment or configured module order does not match the project.
How should the fiber path be checked before condemning IC200PNS002-AB?
Verify transmit/receive polarity, connector cleanliness, patching, bend radius and the far-end port before replacing the scanner.
What is the minimum commissioning record for IC200PNS002-AB?
Record firmware and revision, device name, IP data, module discovery, controller diagnostics and a point-by-point I/O validation.
Recommended Models
| XSP 534 | MPMS 02 227-601-00 | DIL MC95 |
| 9551/10-12 | ADVU-40-120-A-P-A | 1606-XLS120E |
| CS-T02 | RF57 CMPZ80M/KY/AK0H/SMB | 17/17.17 |
| 8EI017HWD10.0B00-1 | WNT 2.5 BL 10X3 1010680000 | Grundfos CRN10-12 A-FGJ-G-E-HQQE |
| O5H500 | ZT2282.00 | Lenze ELN3-0120H017 13086436 |
| WAGO 280-641 280641 | HL8102K | SV 3427.010 |
| TX2300 GP 0331-02 | STN0.4 STN0P4-I2-B2 | ABB 2CDS252001R0104 S202-C10 |
| AC21 13394144 | BOS00A2 | HRI-B4/8L AMRAB152 |
| Herion 2413516.2800 | LNL-1300 | 6AV7894-0BD30-0AC0 |
| C1250-IP-XC-1S-000 | 0935990011 HDC S-QD 8 GW-CONN | DILM95 |
