Converts the documented 120/240 VAC source for the VersaMax modular backplane.
Key Information
IC200PWR102K is the K-revision execution of the IC200PWR102 VersaMax power supply. Emerson identifies the base model as a 120/240 VAC input supply with expanded 3.3 VDC output capability for VersaMax modular control and I/O assemblies.
The K suffix should remain in the procurement and asset record. Replacement review should include the complete rack load, input circuit, grounding, adjacent modules and the installed controller or network-interface configuration.
Functions
Provides expanded 3.3 VDC capacity for supported VersaMax CPU, interface and I/O combinations.
Supplies the compact modular node through the native VersaMax mechanical and electrical interface.
Maintains a revision-controlled power identity for load review and service replacement.
Specifications
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Exact model | IC200PWR102K |
| Base catalog number | IC200PWR102 |
| Product family | VersaMax Modular I/O and Control |
| Product type | AC-input backplane power supply |
| System input | 120/240 VAC |
| Output characteristic | Expanded 3.3 VDC capacity |
| Hardware revision | K |
| Selection basis | Complete rack load and installed label |
Installation
- Calculate the connected VersaMax load, including 3.3 VDC demand, before approving the replacement.
- De-energize the AC source, verify absence of voltage and record input, protective-earth and backplane connections.
- Inspect the mating interface and adjacent modules for heat, contamination or damaged contacts before fitting the supply.
- After power-up, verify controller start, module recognition and stable operation under the normal rack load.
Lifecycle
- Retain the K suffix, rack inventory and load calculation with the spare record.
- Record the input protective device, measured source voltage and grounding arrangement for future diagnosis.
- Treat repeated power loss as a system investigation involving source quality, load, wiring and ventilation.
About IndustryParts
https://www.industryparts.com/Power-supply selection starts with the actual rack load
IndustryParts handles IC200PWR102K with the K revision, AC source and complete VersaMax module inventory visible to the review.
- K revision preserved
- Backplane load documented
- Input circuit reviewed
FAQ
What rack information is needed to quote IC200PWR102K?
Provide the CPU or interface model, every installed module, carrier arrangement, input voltage and a clear photograph of the K-revision label.
Can IC200PWR102K replace a standard-output VersaMax supply without review?
Do not select by physical fit alone; compare input type, 3.3 VDC demand, total backplane load and the approved hardware configuration.
What should be checked after an IC200PWR102K power interruption?
Check the upstream AC circuit, protective device, terminal torque, grounding, rack load and signs of heat before condemning the supply.
Does the K suffix matter when ordering IC200PWR102K?
Yes. Preserve the complete label and confirm whether the site has revision-specific qualification or spare-control requirements.
What proves a replacement IC200PWR102K is ready for service?
Verify stable backplane power, a normal controller start, recognition of every module and operation through a representative machine cycle.
