Emerson IC695FTB001-AA Fiber I/O Terminal Block, AA Release
The initial AA release of the PACMotion RX3i fiber I/O terminal block for a documented motion-control installation.
Product Profile
Emerson IC695FTB001-AA is the AA release of the PACMotion RX3i Fiber I/O Terminal Block.
Manufacturer documentation identifies the FTB001 as an optional motion I/O expansion connected to a PACMotion module by fiber. The terminal block is DIN-rail mounted and the published fiber path may extend to 100 m.
The AA release is listed with firmware version 1.00. CPU, PACMotion firmware, engineering software and the unique PMM/FTB pairing must be checked from the applicable installation record.
Engineering Data
System Architecture
Remote motion I/O termination
Fiber permits the terminal block to be located away from the PACMotion module.
Cross-connection prevention
A unique identity for each PMM/FTB pair helps detect an incorrect fiber endpoint.
Mixed field interface role
The terminal block belongs to the motion I/O path and must be documented with its configured points.
Release-controlled compatibility
AA hardware and firmware information remain part of the installed motion baseline.
Compatibility & Service
Capture the pair
Record IC695FTB001-AA, PACMotion module identity, unique pairing information, firmware and both fiber endpoints.
Protect the optical path
Inspect connector condition and cleanliness, retain the approved cable type and respect the documented route length.
Validate motion I/O
Confirm correct pairing, point states, encoder behavior, output response and machine safety checks before release.
Applications
Distributed motion I/O
Locating documented motor and machine signals away from the RX3i motion module.
Fiber-path maintenance
Replacing an FTB after cable type, length, endpoints and pairing identity are captured.
Motion-system retrofit review
Checking CPU, PMM, engineering software and terminal-block release compatibility together.
About IndustryParts
https://www.industryparts.com/Traceable handling for IC695FTB001-AA
IndustryParts keeps the complete model label, requested quantity, application evidence and delivery record together so the proposed supply can be checked against the installed system before dispatch.
FAQ
What is IC695FTB001-AA used for?
It is the AA-release PACMotion RX3i fiber I/O terminal block used as an optional motion I/O expansion.
Why is PMM/FTB pairing evidence important for IC695FTB001-AA?
The system uses a unique identity to prevent connection to the wrong PACMotion module, so both endpoints belong in the service record.
What software baseline appears in the IC695FTB001-AA release information?
The initial information calls for RX3i firmware 5.60 or later, PACMotion firmware 1.00 or later and Machine Edition Logic Developer–PLC 5.90 or higher.
Which fiber details should accompany a IC695FTB001-AA enquiry?
Provide cable part number, length, endpoint labels, connector photographs, route, PMM identity, firmware and required quantity.
How is IC695FTB001-AA accepted after an exchange?
Verify the correct paired device, normal optical communication, every configured I/O point, encoder signals, commanded outputs and motion safety sequence.
