Emerson KC3011X1-BK1 DeltaV 16-Channel 4–20 mA HART Plus Output Card
A sixteen-channel DeltaV analog output card for 4–20 mA control loops with HART communication and a defined S-Series Plus power profile.
Technical Summary
PRODUCT CONTEXTKC3011X1-BK1 is the Emerson DeltaV S-Series AO 16-Channel 4–20 mA HART Plus Card. It drives analog current loops while retaining HART communication for compatible field-device configuration and diagnostics.
The card draws 12 V DC local-bus power and 24 V DC bussed field power. Its complete BK1 suffix, A5 terminal key and field loop schedule should remain visible because the output card and its terminal arrangement are not selected by channel count alone.
Specifications
CONTROLLED DATA16
4–20 mA with HART support
12 V DC at 160 mA
24 V DC at 400 mA
17 V DC at 23 mA
A5
−40 to +70 °C
5 to 95%, non-condensing
10 g half-sine, 11 ms
ISA-S71.04 Class G3
Features
FUNCTIONAL DISTINCTIONSDense output control
Sixteen current-output channels support compact DeltaV field-device control.
HART communication
Compatible field instruments can use HART data over the analog current path for supported maintenance functions.
Defined power separation
Local-bus, bussed field-power and field-circuit ratings are stated separately for rack and loop review.
Keyed termination
A5 rotary keying helps keep the output card paired with the intended terminal block.
Compatibility
SELECTION BOUNDARIESLoop load and supply
Review every 4–20 mA loop, receiving device and available field voltage before approving the installation.
Terminal assembly
Confirm the exact terminal block and A5 key position; do not substitute a 16-channel input termination.
HART workflow
Retain the HART device records, poll addresses and maintenance procedures used by the installed control system.
Replacement
SERVICE WORKFLOWArchive
Export the controller configuration and record output scaling, fail-state behavior, terminal key and every connected loop.
Install
Isolate system and field power, transfer the keyed termination under the approved procedure and fit the complete KC3011X1-BK1 identity.
Commission
Prove each active analog output and confirm that HART communication, alarms and receiving-device response are correct.
FAQ
CUSTOMER DECISION SUPPORTWhat distinguishes KC3011X1-BK1 from a conventional analog output card?
It combines sixteen 4–20 mA output channels with HART support in the DeltaV S-Series Plus hardware family.
Which power records are needed for KC3011X1-BK1?
Retain the 12 V local-bus load, 24 V bussed field supply and the 17 V / 23 mA field-circuit requirement.
What should accompany a KC3011X1-BK1 quotation?
Provide the BK1 label, A5 terminal key, loop schedule, output ranges, fail-state settings and requested quantity.
Can KC3011X1-BK1 be replaced with a similarly keyed input card?
No. Signal direction, card function, terminal assignment and project configuration all have to match the analog-output execution.
What proves KC3011X1-BK1 is ready for service?
Document commanded current at each used channel, receiving-device movement or indication, HART access and correct controller diagnostics.
About IndustryParts
https://www.industryparts.com/Controlled handling for KC3011X1-BK1
IndustryParts keeps the submitted KC3011X1-BK1 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
