Converts the cabinet DC source into the regulated rails required by DeltaV M-Series control equipment.
Product Profile
KJ1501X1-BC5 is an Emerson DeltaV M-Series system DC power supply associated with the 73-610-148 supply assembly.
The supply accepts either a nominal 24 VDC input at the documented 6.1 A limit or a nominal 12 VDC input at 14.8 A. It provides 12 VDC system power plus 5.1 VDC and 3.4 VDC auxiliary outputs.
The complete BC5 identity, input arrangement and power-carrier installation must be confirmed before replacement because neighboring KJ1501 suffixes represent different system assemblies.
Technical Data
| Manufacturer | Emerson |
|---|---|
| Exact model | KJ1501X1-BC5 |
| System family | DeltaV M-Series |
| Associated supply assembly | 73-610-148 |
| Nominal input option 1 | 24 VDC ±20%, up to 6.1 A |
| Nominal input option 2 | 12 VDC +5% / -4%, up to 14.8 A |
| 12 V output at 24 V input | 12 VDC, 8 A |
| 12 V output at 12 V input | 12 VDC, 13 A |
| Auxiliary outputs | 5.1 VDC at 2 A; 3.4 VDC at 2 A |
| Combined auxiliary output power | 10.2 W maximum |
| Ambient temperature | -40 to 70 °C |
| Enclosure protection of module | At least IP20; install in the required cabinet/enclosure |
System Role
Supports documented 12 VDC or 24 VDC input arrangements.
Feeds the system power carrier rather than acting as a general-purpose standalone supply.
Provides an alarm and maintenance boundary within the DeltaV cabinet power architecture.
About IndustryParts
https://www.industryparts.com/Power-source and carrier evidence travel together
IndustryParts records KJ1501X1-BC5 with the M-Series carrier and actual cabinet input before a supply is quoted.
- BC5 suffix retained
- Input source confirmed
- Carrier label requested
Compatibility
- Match KJ1501X1-BC5 exactly and confirm the 73-610-148 assembly identity.
- Verify whether the installed cabinet is wired for 12 VDC or 24 VDC input.
- Inspect the power carrier, mating connector, alarm wiring and cabinet protection.
- Do not substitute an S-Series KJ1501 or another BC revision without Emerson approval.
Applications
- DeltaV M-Series cabinet power conversion.
- Like-for-like replacement of an installed KJ1501X1-BC5 supply.
- Maintenance planning where cabinet input source and load allocation are documented.
FAQ
Q01Can KJ1501X1-BC5 be used as a general-purpose DC supply?
No. It is a DeltaV system supply intended for its designated power carrier and cabinet architecture.
Q02What should accompany a KJ1501X1-BC5 enquiry?
Provide the full supply and carrier labels, cabinet input voltage, alarm wiring, DeltaV system release, load condition and required quantity.
Q03Can a 12 VDC-wired KJ1501X1-BC5 be moved directly to a 24 VDC cabinet?
The supply supports documented input options, but wiring, protection, carrier configuration and load must be reviewed before any change.
Q04How should a KJ1501X1-BC5 replacement be tested?
Verify input polarity and voltage, regulated outputs, alarm behavior, cabinet load sharing where applicable and stable controller operation.
Q05What evidence is useful for a tested KJ1501X1-BC5?
Request exact label photos, connector inspection, input/output measurements under load, alarm-contact results and traceable test conditions.
Recommended Models
| BRS20-8TX | Moeller DF4-341-22K DE4-NET-K DE4-LZ3-22K | Siemens 6ES5 491-0LC11 |
| FC-302N160T5E54H4BGC3XXSXXXXALBXCXXXXDX | MS4-LFR-1/4-D7-E-U-V-AS | TM3DI32K |
| A06B-6151-H030#H580 | 502001MED-8018X | VS-V-W-D-PNP-M8-4 SO 10.06.02.00262 |
| IV4-L5C | ViS6P 50034747 | TZ1RE024SEM4AS1 |
| 3RA2110-1ED15-1AP0 | CNRJ11 6500072 | IPG YLS-4000-CL |
| Lenze MCA 19S42-SRMP1 | TC806B1076 | EL5501D8000 |
| ABB DC551-CS31 B4 1SAP220500R0001 TU551-CS31B0 | ABB 3BSE008516R1 | MDX61B0750-503-4-0T |
| Kuhse CPU 68000 9603.1-3 | 6FX1112-1AD00 | 5037B1211Y39 |
| L4003N | SRS100/35,10100200 | EK9300 |
| FTL20-0020 | 4AP1795-8DA00-8Y | MCS 09H41LRS0P2-B14N-ST5S00N-R0SU |
