Drives 24 compatible 24 VDC field loads within the HIMax safety platform.
Key Information
X-DO 24 01 is a HIMA HIMax safety-related digital output module with 24 channels. HIMA lists 24 VDC outputs rated 0.5 A, LS/LB line monitoring, individual channel shutdown and a SIL 3 classification.
The model with spaces is the controlled identity and must not be collapsed into another X-DO execution. Field termination assemblies, output loads, safety application and module release remain part of the compatibility review.
Functions
Monitors field lines for the documented open-load and short-circuit diagnostic conditions.
Supports individual output-channel shutdown for safety-related application design.
Integrates with approved HIMax base plates and compatible field termination assemblies.
Specifications
| Manufacturer | HIMA Paul Hildebrandt GmbH |
|---|---|
| Exact model | X-DO 24 01 |
| Platform | HIMax |
| Product type | Safety-related digital output module |
| Output count | 24 channels |
| Nominal output voltage | 24 VDC |
| Rated output current | 0.5 A per channel |
| Diagnostics | Line monitoring LS/LB |
| Shutdown | Individual channel shutdown |
| Safety classification | SIL 3 |
| Compatible termination context | Approved HIMax X-FTA arrangements |
| Certified ambient reference | -20 to +60 degrees C for the listed hazardous-location execution |
Installation
- Apply the approved safety-system bypass, isolation and proof-test plan before removing the module or field termination.
- Record every output channel, load current, line-monitoring configuration and X-FTA identity.
- Confirm that each 24 VDC load remains within the channel rating and that inductive suppression matches the design.
- After installation, verify module diagnostics and perform the required end-to-end proof test for every affected safety function.
Lifecycle
- Keep the exact X-DO 24 01 spacing, module release, base-plate position and X-FTA identity in the asset record.
- Retain the safety requirement specification, cause-and-effect record and proof-test results with the hardware history.
- Review line-monitoring alarms as field-circuit evidence before assuming an output module fault.
About IndustryParts
https://www.industryparts.com/Safety output enquiries remain tied to the proof-test boundary
IndustryParts prepares X-DO 24 01 requests with the module release, termination, load evidence and HIMax safety documentation aligned.
- Exact spaced model retained
- Termination identity recorded
- Proof-test scope confirmed
FAQ
What safety records should accompany an X-DO 24 01 enquiry?
Provide the module release, base-plate slot, X-FTA identity, safety application release, cause-and-effect reference and required certifications.
Can X-DO 24 01 be substituted with X-DO 24 01 A?
Do not infer interchangeability from the similar name; compare certified hardware releases, system firmware, project approval and HIMA migration guidance.
What load data matters for each X-DO 24 01 channel?
Supply steady current, inrush, inductive characteristics, suppression, line-monitoring components and the required safe state.
How should an X-DO 24 01 line alarm be investigated?
Inspect the field loop, load, fuse path, termination and configured monitoring thresholds before replacing the module.
What acceptance testing follows X-DO 24 01 replacement?
Complete diagnostics, commanded-state checks and the approved end-to-end safety proof test for every disturbed channel.
