go on
Home>DCS>HollySys K-AIH01 8-Channel HART Analog Input Module

Hot Categories

HollySys K-AIH01 8-Channel HART Analog Input Module

HollySys K-AIH01 8-Channel HART Analog Input Module

Item NO.: K-AIH01
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameHollySys K-AIH01 8-Channel HART Analog Input Module
  • Item NO.K-AIH01
  • Weight0.0000 kg = 0.0000 lb = 0.0000 oz
  • CategoryDCS
  • BrandHollysys
  • Creation Time2026-08-18
  • HOLLiAS MACS-K current-input module with eight channels, HART communication and optional redundancy.
Hollysys Industrial Automation

HollySys K-AIH01 8-Channel HART Analog Input Module

HOLLiAS MACS-K current-input module with eight channels, HART communication and optional redundancy.

Product Identification

HollySys K-AIH01 is a K-series eight-channel analog-input module for current signals with HART communication.

The module belongs to the HOLLiAS MACS-K I/O family and is used where process values and HART device information must be integrated into the control system. It follows the K-AI01 analog-input function while adding HART 5 communication capability.

A complete installation requires the compatible base and terminal-board arrangement, channel wiring, field power, HART loop conditions, redundancy setting and MACS-K configuration to be checked together.

Engineering Data

Model K-AIH01
Manufacturer HollySys
System family HOLLiAS MACS-K
Module type Analog input with HART
Input channels 8
Signal family Current input
Common process signal 4–20 mA
HART protocol HART 5
Redundancy Optional
Supported field wiring Two-wire and four-wire transmitter arrangements with the approved terminal hardware
Module role Acquisition of analog process values and HART device information

Functions

  • Digitizes eight current-input channels for the MACS-K control system.
  • Adds HART 5 communication for compatible smart field instruments.
  • Supports approved two-wire and four-wire transmitter arrangements.
  • Can be engineered in an optional redundant module configuration.
  • Provides module and channel status information to the control system.
  • Supports maintenance access to HART information when the complete system configuration is qualified.

System Integration

  • Select the approved base and terminal board for the required wiring and redundancy arrangement.
  • Confirm loop power, polarity, shield grounding and field-device HART compatibility.
  • Configure the exact signal type, range, engineering units, filtering and diagnostic handling for every channel.
  • In a redundant installation, verify primary/standby status and test transfer behavior before service.
  • Confirm the MACS-K software and module revision supported by the installed controller.

Applications

  • Eight-channel 4–20 mA transmitter input.
  • HART pressure, flow, level and temperature transmitters.
  • Process-unit instrument monitoring.
  • Redundant analog-input stations.
  • Brownfield MACS-K I/O maintenance.

Lifecycle

Record the module revision, base, terminal board and MACS-K software version before replacement.

K-AIH01 should not be confused with K-AI01: K-AIH01 adds HART communication to the eight-channel current-input function.

After replacement, validate analog scaling, HART communication, diagnostics and redundancy where configured.

FAQ

Q1. What distinguishes K-AIH01 from K-AI01?
K-AIH01 adds HART 5 communication to the eight-channel current-input function.
Q2. How many channels are provided?
The module provides eight analog-input channels.
Q3. Can it be configured redundantly?
Yes. HollySys lists optional redundancy for this module family when the approved base and system configuration are used.
Q4. Does the module supply all field-loop power requirements by itself?
The complete loop-power and terminal arrangement must be engineered with the approved base, terminal board and cabinet power system.
Q5. Can HART be used without configuration?
No. The field device, wiring, loop conditions, module channel and MACS-K asset or control configuration must support HART.
Q6. What should be tested after replacement?
Test every analog value, scaling, HART communication, channel diagnostic and redundant transfer where used.

Sales Support

Send the exact part number, hardware revision, required quantity and destination to IndustryParts for compatibility and availability assistance.

sales@mvme.cn
WhatsApp / Phone: +86 18030175807

You May Also Like