Honeywell DC-TAIX61 High-Level Analog Input IOTA
01Product Identification
Honeywell DC-TAIX61 is an Input Output Terminal Assembly used with supported Experion Series C high-level analog input modules. Honeywell identifies it as a compatible IOTA for CC-PAIH51 HART analog input service and for CC-PAIN01 high-level analog input configurations within the documented Universal Marshalling Solution.
02Key Features
Design and Functions
- The IOTA terminates field wiring for a compatible Series C analog input module.
- Honeywell explicitly lists DC-TAIX61 with CC-PAIH51 for high-level analog input with HART.
- The same IOTA is listed with CC-PAIN01 in the documented high-level analog-input compatibility table.
- Module and IOTA selection is controlled as a matched combination rather than by connector appearance alone.
- Universal marshalling documentation defines the mechanical, vibration, shock, ingress, flammability, and hazardous-location context for the complete assembly.
- Replacement work should preserve channel terminals, shields, field power, barriers, and the installed redundancy or marshalling design.
Product Identity
Manufacturer: Honeywell
Model: DC-TAIX61
Product Type: High-Level Analog Input IOTA
03Engineering Data
| Manufacturer | Honeywell |
|---|---|
| Model | DC-TAIX61 |
| Product Type | Input Output Terminal Assembly (IOTA) |
| I/O Service | High-level analog input |
| Supported Module | CC-PAIH51, high-level analog input with HART |
| Additional Supported Module | CC-PAIN01 in the documented analog-input configuration |
| Related IOTA Variants | CC-TAIX51, CC-TAIX61, and DC-TAIX51 are listed in the same compatibility groups |
| System Context | Experion Series C I/O / Universal Marshalling Solution |
| Ingress Protection | IP20 for the documented system arrangement |
| Flammability Rating | UL 94 V-0 |
| Operational Vibration | 0.5 g, 10...150 Hz |
| Non-Operational Vibration | 1 g, 10...150 Hz |
| Operational Shock | 5 g |
| Non-Operational Shock | 15 g |
| Compliance Context | RoHS and documented hazardous-location conformance for the complete approved assembly |
04System Integration
- Confirm DC-TAIX61 against the installed IOTA label and the paired Series C I/O module.
- Verify channel terminal assignments, loop polarity, transmitter power, cable shields, grounding, HART use, and any galvanic or intrinsic-safety barrier.
- Validate the complete module/IOTA/barrier/enclosure combination against the project hazardous-location documentation.
- Preserve channel database assignments, engineering units, scaling, alarms, diagnostics, and asset records before rewiring.
- Complete a documented loop check on every used channel before the process is returned to service.
05Applications
- Experion Series C high-level analog input termination.
- HART-capable process transmitter loops using CC-PAIH51.
- Documented CC-PAIN01 analog-input arrangements.
- Universal marshalling cabinets requiring the exact DC-TAIX61 terminal assembly.
06Lifecycle
- Match DC-TAIX61 to the exact supported I/O module and approved Universal Marshalling hardware.
- Record all channel terminals, cable shields, loop power, barriers, grounding, HART use, module revision, and cabinet certification.
- Do not infer hazardous-area suitability from the IOTA alone; validate the complete module, IOTA, barrier, enclosure, and installation approval.
- After exchange, perform channel-by-channel loop checks, HART communication checks where used, diagnostics, and DCS scaling verification.
- Any conversion to another IOTA requires an official compatibility review and field-wiring comparison.
FAQFrequently Asked Questions
What is
DC-TAIX61 is an IOTA for supported Honeywell Series C high-level analog input modules.
Which system or application is it designed for?
It is used with documented Experion Series C analog-input module combinations including CC-PAIH51 and CC-PAIN01.
What must be matched before ordering?
Match the complete model or article number, installed hardware revision, electrical ratings, interfaces, wiring, approvals, and project configuration.
What information should be recorded before replacement?
Record the paired I/O module, hardware revisions, channel terminals, loop power, shields, grounding, HART use, barriers, cabinet design, and approvals.
How should lifecycle or migration be handled?
Use only a Honeywell-documented module/IOTA combination or an engineered Universal Marshalling conversion.
What should be checked after installation?
Verify every loop, polarity, current value, HART communication where used, channel diagnostics, alarms, and DCS engineering-unit scaling.
+Recommended Models
| UD2A-EDID-S | 9050AO10EV02 | MERTEN 647593 |
| AC-VQL1BL | 750168443 | 1043783 FX3-CPU000000 |
| CD-3830R | 760ATC | BSM400GA120DN2FS-E3256 |
| 8DI ITEM3-2000U008000 | PW481-10-S2 | 2CDG110088R0011 |
| 120b1021 | 67DFR / LOC477 / 250PSI / 0-60PSI | ELRV-30/Z89 |
| BST-ET14 | cmd-953a | K910B |
| GTE6SP-22A1116EZZZ | FC-IO-0001 | SB-DN-PS750 |
| 1RK 221 052-AS | 13090001 | 2CDG 110 093 R0011 |
| CNX-B12W | 2N 9151002 | ABB TU842 / 3BSE020850R1 |
| GV3P50 | 6160V | 800-40404-01 T1-1M |
