Honeywell TC-IOLI01 I/O Link Interface
Model: TC-IOLI01 | Product Type: I/O Link Interface
01Technical Summary
Honeywell TC-IOLI01 is the I/O Link Interface listed in the Honeywell Series A I/O family. It supports the system-specific I/O link function used in compatible C200 and C200E installed-base architectures. The term I/O Link here identifies Honeywell legacy control hardware and should not be assumed to mean the modern sensor-level IO-Link protocol.
02Specifications
| Manufacturer | Honeywell |
|---|---|
| Model | TC-IOLI01 |
| Product Type | I/O Link Interface |
| System Family | C200 / C200E installed-base hardware |
| I/O Family Context | Series A |
| Cataloged Related Variant | TK-IOLI01 |
| Lifecycle Context | Series A I/O family phase-out notice effective January 31, 2023 |
| Selection Basis | Exact chassis, system release, I/O link, and hardware revision |
03Features
- Provides the Honeywell-listed I/O link interface function for compatible Series A architectures.
- Uses the exact TC-IOLI01 model identity for configuration control and spare matching.
- Supports installed-base maintenance in C200 and C200E system environments when officially configured.
- Is listed separately from TK-IOLI01, so the complete hardware designation must be checked.
- Can be evaluated as part of a broader Series A I/O retention or migration strategy.
Product identity
TC-IOLI01
Product type
I/O Link Interface
04Compatibility
- Confirm the C200 or C200E controller, chassis, I/O link topology, system release, and hardware revision.
- Do not assume compatibility with modern IO-Link sensors or masters; this model belongs to Honeywell legacy control architecture.
- TC-IOLI01 and TK-IOLI01 are separately listed model codes and should not be interchanged without official confirmation.
- Review all connected I/O and interface components before replacing or migrating the link interface.
05Replacement
- Use the exact TC-IOLI01 designation for like-for-like maintenance unless approved documentation specifies otherwise.
- Capture the controller configuration, link topology, and connected I/O inventory before service.
- Honeywell migration guidance allows Series A I/O retention in selected C300 with FTE Bridge and UOC or vUOC pathways, subject to engineering review.
- Validate network, power, chassis, software, and I/O dependencies as one system before commissioning a replacement.
06FAQ
What is TC-IOLI01?
It is the Honeywell I/O Link Interface listed for the Series A I/O family.
Is this a modern IO-Link sensor interface?
That should not be assumed. The model belongs to Honeywell legacy control-system architecture.
Can TK-IOLI01 be substituted directly?
Not without verification. Honeywell lists TC-IOLI01 and TK-IOLI01 as separate model codes.
What compatibility checks are required?
Confirm the controller, chassis, I/O link topology, system release, connected I/O, and hardware revision.
What lifecycle planning applies?
The Series A I/O family is covered by Honeywell phase-out and migration guidance for installed systems.
Why is no weight shown?
No verified manufacturer weight was available for this exact model, so it is omitted.
+Recommended Models
| T-500SW 430209001 | 102097-00 | da5gp |
| HS2LCDS | PSM-512S | CP-8800-A-KEM |
| MS-RA205 | 8803006430 RHT-WM-485-LCD | SPCW111.000 |
| 3718B004 | EDS-205 | PS00E03knx |
| 150345 Ku-12.25-12.75 | DI-16 SXWDI16XX10001 | ABB UMC100-PAN 1SAJ590000R0102 |
| ABB AI561 1TNE968902R1101 | WRT-822B/62 | 14MC 0110 3S25A10 |
| SMART-G4 SB-6B0-10V-DN | ABB 1SVR427025R0000 | 2811297 |
| 6ES7392-1AM00-0AA0 | S701 | 41002002 |
| 430223001 / T-200 | 713723H05 KM713720G11 | 2CDG110182R0011 |
| EDA70-UC-R | GJR2242000R1 LR370A-E 9083/031 | X208Pro 6GK5208-0HA10-2AA6 |
