Mitsubishi Electric MDS-R-V2-8080 Two-Axis Servo Drive Unit
A two-axis MDS-R series servo drive unit for Mitsubishi MELDAS CNC motion systems.
Overview
MDS-R-V2-8080 is a two-axis servo drive unit in the Mitsubishi Electric MELDAS MDS-R platform. It combines two controlled motor outputs in one drive assembly and operates as part of the CNC power and communication architecture.
Replacement planning must cover both axes, the compatible motors, regenerative components, control power, communication and parameter records. A single-axis symptom does not by itself prove that the shared drive unit is defective.
Specs
| Manufacturer | Mitsubishi Electric |
|---|---|
| Model | MDS-R-V2-8080 |
| Product Family | MELDAS MDS-R Series |
| Device Type | Two-axis servo drive unit |
| Main Power Terminal | CN30: L1, L2, L3 |
| Motor Outputs | CN31L and CN31M |
| Control Power | 24 V DC at CN22 |
| Magnetic Brake Connection | CN9 |
| Recommended Circuit Protector | 40 A class for the documented unit |
| Maximum Motor Wiring Length | 30 m |
| Documented Installation Ambient | Up to 40 °C for the cited cable-selection conditions |
Features
- Controls two servo axes within one MELDAS drive enclosure.
- Shares main power and regenerative coordination across the dual-axis unit.
- Provides separate motor-output connections for the L and M axes.
- Integrates diagnostics and protection with the CNC drive system.
Applications
- Multi-axis CNC machine tools.
- Coordinated feed and spindle-support servo systems.
- Legacy MELDAS cabinet maintenance.
Lifecycle
- Back up CNC and servo parameters for both axes.
- Label every motor, encoder, brake and communication connection by axis.
- Inspect cooling passages and power terminals during replacement.
- Validate each axis separately before coordinated machine motion.
FAQ
Which evidence helps diagnose MDS-R-V2-8080 before replacement?
Provide alarm history, both motor labels, insulation tests, encoder checks, regenerative-unit condition and axis-specific symptoms.
Can one failed axis be replaced independently inside MDS-R-V2-8080?
Treat the unit as a documented two-axis assembly; internal repair or exchange should follow Mitsubishi service procedures.
What must be backed up before changing MDS-R-V2-8080?
Save CNC and servo parameters, axis assignments, machine constants and any compensation data tied to both connected motors.
Can another MDS-R-V2 rating replace MDS-R-V2-8080?
Only after motor combinations, current capacity, connectors, power supply, cabinet space and CNC compatibility are engineered.
What wiring mistake is especially risky with MDS-R-V2-8080?
Crossing L-axis and M-axis motor, encoder or brake connections can create dangerous motion and must be prevented with verified labeling.
What commissioning sequence follows a MDS-R-V2-8080 exchange?
Check power and communication first, test each axis at controlled low speed, verify brakes and limits, then prove coordinated machine operation.
Recommended Models
| VLT2811PT4B20SBR1DBF00A00 195N1028 | S100B 12/10 | STEP-PS/1AC/24DC/2.5 |
| ABB 2CL0813041 | MASI68 | CS60 39159-02 |
| C6340-0040 | ABB BBC gjr2 240900 | AAI835-H00 |
| MB20520905A62A644 | VAZ-T1-FK-G10-PTC-1M-PUR-V1-G | 316SS-PTFE |
| NT41219244/CJJHMIRN14MC-M1100 | WL12-2P120 | ZB12-6 XTOB006BC1 |
| EP2816-0008 | KX-T96145 | LRS-1/4-D-O-I-MIDI |
| E77/6EG24K4QM0G24 R900977302 | DV-20-01.1/0 | A12-30-10 1SBL161001R8410 |
| ABB RXSF1-220-250V | A14F1/250 | SEW Eurodrive MCLTPB03705A3410 |
| MOORE 41N15 | 900NTNNEK00000-J001 | MCR-C-U/U-A |
| RIXSON FM996 | 142638 Rev. A | IK3071.12 0032339 |
