SIPOS 2SY5010-1LY05 Actuator Power-Control Board
01Product Overview
SIPOS 2SY5010-1LY05 is an actuator power-control spare associated with the SIPOS electric-actuator electronics platform. Public manufacturer literature explains the frequency-converter architecture and modular spare-parts strategy, but does not expose the complete electrical rating for this exact suffix; the actuator nameplate and serial-specific spare-parts record therefore control selection.
02Functions
Core Functions
- The SIPOS frequency converter controls motor speed and direction and sets the torque-producing motor voltage.
- Controlled motor starting limits the conventional start-up current effect.
- Continuous current and torque monitoring protect the actuator and valve train.
- Automatic phase-sequence correction is provided by the actuator power-conversion architecture.
- Voltage monitoring detects overvoltage and undervoltage conditions.
- Temperature-sensitive voltage control compensates for temperature-related motor-torque changes.
Product Identity
- Manufacturer: SIPOS Aktorik
- Model: 2SY5010-1LY05
- Product Type: Actuator Power-Control Board
- Review Status: Configuration verification
03Specifications
| Manufacturer | SIPOS Aktorik |
|---|---|
| Part Number | 2SY5010-1LY05 |
| Product Type | Power-control / power-electronics spare board |
| System Context | SIPOS electric-actuator electronics |
| Control Principle | Frequency-converter actuator motor control |
| Actuator Family | Confirm against actuator type and serial number |
| Rated Power | Confirm from the exact board and actuator nameplates |
| Supply Voltage | Confirm from the actuator order data |
| Motor Compatibility | Serial- and configuration-dependent |
| Board Revision | Must match the approved SIPOS spare-parts record |
| Commissioning Data | Preserve actuator parameters and end-position settings |
| Replacement Control | Obtain manufacturer confirmation against the actuator serial number |
04Compatibility
- Match the actuator type, complete order code, serial number, motor rating, supply, electronics generation, connector layout, board revision, and firmware context.
- Confirm whether the installed actuator is a legacy SIPOS 5 Flash or another generation before ordering.
- Do not infer the rated power or voltage from a similar 2SY5010 suffix.
- Preserve the local-control, fieldbus, I/O, torque, speed, and end-position configuration.
- SIPOS recommends serial-specific spare-parts identification for installed actuators.
05Applications
Typical Uses
- Corrective maintenance of SIPOS electric-actuator power electronics.
- Valve actuators in power generation, water and wastewater, and general process industries.
- Installed-base spare-parts planning for critical open/close and modulating valves.
- Manufacturer-assisted repair where the exact board revision must be matched.
Selection Boundary
- Use the exact model and manufacturer identity shown on the installed product.
- Treat application examples as context, not as proof of compatibility.
- Confirm electrical, mechanical, communication, safety, and environmental requirements before ordering.
06Lifecycle
- Treat 2SY5010-1LY05 as a serial-controlled spare, not a universal actuator board.
- Capture clear photographs of the actuator and board nameplates, connectors, revision labels, and wiring.
- Export or record torque, speed, direction, end-position, fieldbus, remote-I/O, and local-control settings.
- Request SIPOS confirmation of the correct current spare or repair path.
- After board replacement, perform the complete actuator and valve commissioning procedure, including direction, limits, torque cut-off, interlocks, remote control, and fail-state tests.
FAQFrequently Asked Questions
What is
2SY5010-1LY05 is a SIPOS actuator power-control spare whose exact electrical version must be matched to the installed actuator.
Where is this product used?
It is used in the power and motor-control electronics of a compatible SIPOS electric valve actuator.
What should be confirmed before ordering?
Confirm the complete model or part number, manufacturer, installed hardware revision, electrical design, interfaces, wiring, approvals, and project configuration.
What information should be recorded before replacement?
Record actuator type, order code, serial number, board part and revision, supply, motor, connectors, firmware, torque, speed, limits, fieldbus, I/O, and parameter backup.
Is another model a direct replacement?
No direct replacement can be confirmed from the short part number alone; obtain a serial-specific SIPOS spare-parts confirmation.
What should be checked after installation?
Verify supply, motor direction, travel, end positions, torque cut-off, speed, local and remote control, interlocks, feedback, diagnostics, and valve operation.
+Recommended Models
| B&R X20CS1030 | MB3170-T | DVR1 |
| IM1-12EX-T | 3EH73034ABJB | 800-40403-01 |
| STA4D-00 | GLB161.1E | 1SAP250300R0001 |
| DTK-120HW | 700224-001 75W/8 | Televes 7340 |
| EVD0000T01 | MPL4-10 | GU8450SS |
| IFU-WLM3 | 5110-00 800-5870-1R | ABB CI512 / 1SAP221000R3002 |
| CPY000U200 | ECM-14001GB | 025-30889-000 |
| 915 J/K PT100 ICP22JI750000 | JL325A | 4G-M 460021 |
| NS-BCN7004-0 | RF4012I4PI | TA524 / 1SAP180600R0001 |
| OMX-IO | PCS18 | Din-8SW8-I |
