Siemens 6EP1332-1SH71 SIMATIC S7-1200 PM1207 Stabilized Power Module
A stabilized single-phase power module for SIMATIC S7-1200 installations, delivering 24 V DC at 2.5 A from a 120/230 V AC input.
Product Identification
6EP1332-1SH71 is the Siemens PM1207 stabilized power module for SIMATIC S7-1200 installations. Its published conversion path is 120/230 V AC input to 24 V DC output at 2.5 A.
The module is ordered as one piece and has a manufacturer-listed net weight of approximately 0.300 kg. The complete MLFB should remain with the panel supply record because input protection, downstream load and space allocation are installation-specific.
The PM1207 identity links the AC input class, 24 V DC output and 2.5 A rating in one Siemens order number.
Engineering Data
- Product designation
- SIMATIC S7-1200 PM1207
- Supply type
- Stabilized power module
- Input
- 120 / 230 V AC
- Output voltage
- 24 V DC
- Output current
- 2.5 A
- Product group
- One-phase 24 V DC supply for S7-1200
- Lifecycle status
- Active product
- RoHS conformity
- Since 2009
- Quantity unit
- 1 piece
Functions
Convert AC power
Provides regulated 24 V DC control power from the supported single-phase AC input.
Support the S7-1200 panel
Supplies a documented DC source for the controller installation and approved peripheral loads.
Maintain a controlled supply record
The PM1207 MLFB keeps the rated input and output class visible in the electrical documentation.
Applications
S7-1200 controller supply
Use the stabilized 24 V DC output where the complete panel load remains within the 2.5 A rating.
Control-circuit power
Feed approved sensors, interfaces or relays only after their combined demand and inrush have been calculated.
Service replacement
Retain upstream protection, earthing, conductor sizing and downstream distribution from the approved panel design.
Lifecycle
Record
Capture the complete 6EP1332-1SH71 label, AC source, protective device and measured DC load.
Isolate
Lock out the AC input and prove both input and output de-energized before conductor removal.
Reconnect
Restore line, neutral or phase, protective earth and 24 V DC polarity exactly as documented.
Validate
Measure the stabilized output under load and verify the controller and all supplied circuits start normally.
About IndustryParts
https://www.industryparts.com/Controlled handling for 6EP1332-1SH71
IndustryParts keeps the submitted 6EP1332-1SH71 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
FAQ
What output does 6EP1332-1SH71 provide?
Siemens lists a stabilized 24 V DC output rated at 2.5 A.
Which input class belongs to 6EP1332-1SH71?
The PM1207 product description identifies a 120/230 V AC input.
What should accompany a 6EP1332-1SH71 order?
Send the full MLFB, input voltage, protective-device record, measured DC load and requested quantity.
Can 6EP1332-1SH71 be selected only from its 24 V output?
No. Output current, input class, mounting space, protection and the complete panel load must also match.
What proves 6EP1332-1SH71 is ready after replacement?
Confirm correct polarity, stable 24 V DC under load, normal controller startup and acceptable temperature at the documented load.
