Siemens 6ES7288-7DP01-0AA0 EM DP01 PROFIBUS DP Slave Module
An S7-200 SMART PROFIBUS DP slave module with one DP/MPI interface and rotary address setting.
Product Profile
PROFILESiemens 6ES7288-7DP01-0AA0 is the SIMATIC S7-200 SMART EM DP01 PROFIBUS DP slave module with one PROFIBUS DP/MPI interface.
The module supports transmission rates from 9.6 kbit/s to 12 Mbit/s and uses a 9-pin D-sub interface. Two rotary switches set the DP address while front indicators report power, DP error and operating state.
Commissioning requires the approved GSD/project data, a unique station address, correct segment termination, shield continuity and the documented 24 VDC supply.
Technical Data
DATASystem Role
SYSTEMCompatibility
MATCHArchive
Save the GSD, master project, I/O map, DP address, baud rate, segment drawing and termination locations.
Install
Set the documented address, connect 24 VDC/functional earth and verify D-sub shield and termination.
Commission
Confirm power and DP indicators, master diagnostics, cyclic data, fault recovery and the approved project checksum.
Applications
APPLICATIONPROFIBUS plant integration
Connecting an S7-200 SMART station as a slave under a compatible DP master.
Legacy network extension
Adding a documented DP interface while preserving the approved segment design and GSD record.
Communication spare
Replacing the same EM DP01 after address, wiring and project evidence are captured.
About IndustryParts
https://www.industryparts.com/Exact-model handling for 6ES7288-7DP01-0AA0
IndustryParts prepares this em dp01 profibus dp slave module enquiry with the complete label, requested quantity and installed-system evidence kept together, so the proposed supply can be compared with the actual application before dispatch.
FAQ
QUESTIONSQ01Is 6ES7288-7DP01-0AA0 a PROFIBUS master module?
No. Siemens identifies 6ES7288-7DP01-0AA0 as the EM DP01 PROFIBUS DP slave module.
Q02How is the station address set on 6ES7288-7DP01-0AA0?
Use the S10 and S1 rotary switches and keep the physical setting aligned with the master project.
Q03What network evidence should accompany a 6ES7288-7DP01-0AA0 enquiry?
Provide the module label, CPU and firmware, master type, GSD/project record, DP address, baud rate, connector and termination photographs.
Q04Can 6ES7288-7DP01-0AA0 be commissioned from a D-sub connection alone?
No. Supply, address, shield, termination, GSD, master configuration and cyclic I/O mapping must all be correct.
Q05What proves 6ES7288-7DP01-0AA0 is ready for service?
Record normal power/DP indications, stable cyclic exchange, correct I/O data, fault-recovery behavior and matching physical/project addresses.
