Siemens 6ES7292-1AG30-0XA0 SIMATIC S7-1200 Seven-Pole Tin-Plated Terminal Block Set
A spare terminal-block set for selected S7-1200 digital signal modules, supplied as four seven-pole screw-terminal blocks.
Technical Summary
PRODUCT CONTEXT6ES7292-1AG30-0XA0 is the Siemens spare I/O terminal-block set with seven screw terminals and tin-plated contacts. Siemens catalog data assigns it to selected SIMATIC S7-1200 digital signal modules with 8-channel or 16-channel field connections.
This is the screw-terminal execution, not the similarly coded push-in or encoded version. The installed signal-module MLFB and terminal orientation should be checked before the original conductors are moved.
Specifications
CONTROLLED DATASpare I/O terminal block
7 per block
Screw terminal
Tin-plated
4 blocks
SIMATIC S7-1200
Digital signal modules, 8CH / 16CH
Push-in and encoded executions use different article numbers
Features
FUNCTIONAL DISTINCTIONSDefined spare package
One Siemens article supplies four matching seven-pole blocks for planned panel maintenance.
Screw-clamp connection
The field conductors are retained by screw terminals rather than push-in contacts.
MLFB-controlled selection
The complete article number distinguishes this tin-plated set from visually similar S7-1200 terminal accessories.
Reusable wiring record
Terminal numbers can be photographed and mapped before transfer to reduce wiring errors.
Compatibility
SELECTION BOUNDARIESSignal-module identity
Confirm the exact S7-1200 signal-module MLFB against the Siemens accessory table before ordering.
Terminal technology
Do not exchange this screw-terminal set with a push-in or differently keyed set solely because the pole count appears similar.
Field wiring
Verify conductor size, ferrules, terminal numbering and approved tightening practice for the installed panel.
Replacement
SERVICE WORKFLOWMap
Record the host module, seven terminal positions, wire numbers and any unused points before removal.
Transfer
Isolate field energy and move one conductor at a time to the matching position on 6ES7292-1AG30-0XA0.
Inspect
Check mechanical retention, separation and the complete I/O point schedule before re-energizing the station.
FAQ
CUSTOMER DECISION SUPPORTHow many terminal blocks are supplied under 6ES7292-1AG30-0XA0?
Siemens catalog data identifies a package of four seven-pole terminal blocks.
Is 6ES7292-1AG30-0XA0 a push-in terminal set?
No. This article is the screw-terminal execution; Siemens lists separate article numbers for push-in variants.
What should accompany a 6ES7292-1AG30-0XA0 order?
Provide the host signal-module MLFB, photographs of the installed blocks, conductor schedule and required pack quantity.
Can 6ES7292-1AG30-0XA0 be selected from the seven-pole count alone?
No. Contact finish, connection technology, keying and the host module assignment must also match.
What acceptance check follows a 6ES7292-1AG30-0XA0 change?
Verify terminal torque or retention, point-to-point continuity and the expected controller state for every transferred conductor.
About IndustryParts
https://www.industryparts.com/Controlled handling for 6ES7292-1AG30-0XA0
IndustryParts keeps the submitted 6ES7292-1AG30-0XA0 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
