Home>PLC>Siemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack

Hot Categories

Siemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack

Siemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack

Item NO.: 3746872

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack
  • Item NO.3746872
  • Weight1.5000 kg = 3.3069 lb = 52.9109 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-25
  • SIMATIC S7-400 UR2 Aluminum Rack
Siemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack

Siemens 6ES7400-1JA11-0AA0 SIMATIC S7-400 UR2 Aluminum Rack

ManufacturerSiemensModel6ES7400-1JA11-0AA0Product TypeSIMATIC S7-400 UR2 universal rack

01Overview

Siemens 6ES7400-1JA11-0AA0 is the aluminum UR2 universal rack for central or distributed SIMATIC S7-400 stations. It provides nine module slots and carries both the communication bus and the P bus across the backplane. The rack can accept two redundant power supplies, making it suitable for engineered S7-400 configurations that require a compact nine-slot mechanical and electrical platform.

Configuration ControlVerify the complete article number, installed rack, power, interfaces, software, wiring and lifecycle requirement before ordering.

02Specs

Manufacturer Siemens
Article Number 6ES7400-1JA11-0AA0
Product Designation UR2 universal rack
Automation System SIMATIC S7-400
Rack Material Aluminum profile
Application Central and distributed configurations
Module Slots 9
Redundant Power-Supply Positions Up to 2
Communication Bus Integrated
P Bus Integrated
Operating Temperature 0 to 60 degrees C
Storage and Transport Temperature 0 to 70 degrees C
Commercial Status Active product

03Features

Key Functions

  • Nine S7-400 slots support a compact central or expansion-station layout.
  • Integrated communication-bus and P-bus paths distribute system signals through the rack backplane.
  • Two power-supply positions allow a redundant supply arrangement when compatible PS 407 modules and the full station design are used.
  • The aluminum profile provides the mechanical carrier and defined mounting geometry for S7-400 modules.
  • The rack can be applied in either central or distributed S7-400 configurations.
  • Front-accessible module installation supports structured cabinet assembly and service work.

Product Identity

  • Manufacturer: Siemens
  • Model: 6ES7400-1JA11-0AA0
  • Product Type: SIMATIC S7-400 UR2 universal rack
  • Status: Active product

04Applications

  • Central racks for compact SIMATIC S7-400 control stations.
  • Distributed or expansion racks in engineered S7-400 architectures.
  • Process and manufacturing control cabinets that require nine module positions.
  • Redundant power-supply arrangements using supported S7-400 power modules.
  • Maintenance replacement of an existing UR2 rack with the same article and station design.
  • System extensions where the communication-bus and P-bus requirements match the UR2 backplane.

05Lifecycle

  • Siemens identifies the exact article as an active product.
  • Confirm the rack article number, slot count and backplane requirement before ordering.
  • Record the complete module sequence, rack address, interface-module arrangement and power design before replacement.
  • A rack exchange requires full isolation of the station and careful preservation of all connectors and module positions.
  • After installation, inspect the backplane connectors and verify every module, bus connection, power supply and diagnostic state.

06FAQ

What is Siemens 6ES7400-1JA11-0AA0?

It is the nine-slot UR2 aluminum universal rack for central or distributed SIMATIC S7-400 stations.

How many module slots are available?

The UR2 rack provides nine S7-400 module slots.

Can redundant power supplies be installed?

Yes. The rack provides positions for up to two redundant power supplies when the complete station is designed with supported modules.

Which backplane buses are included?

The rack includes both the S7-400 communication bus and the P bus.

Can it be used as a distributed rack?

Yes. Siemens specifies the UR2 for central and distributed applications, subject to the appropriate interface and station configuration.

What should be checked after a rack replacement?

Verify the module sequence, connectors, supply arrangement, rack communication, station diagnostics and every dependent I/O path.

You May Also Like