Siemens 6ES7522-1BH10-0AA0 SIMATIC S7-1500 DQ 16x24 V DC/0.5 A BA Module
A basic S7-1500 digital output module with sixteen 24 V DC, 0.5 A sourcing channels arranged in two groups of eight.
Technical Summary
PRODUCT CONTEXT6ES7522-1BH10-0AA0 is the SIMATIC S7-1500 DQ 16x24 V DC/0.5 A BA output module. Its sixteen sourcing outputs are arranged in two groups of eight, with a published limit of 0.5 A per channel and 4 A per group.
The module includes the U-connector and push-in front connector. Siemens identifies safety-oriented shutdown of load groups up to SIL 2 / Category 3 PL d when the application and external shutdown architecture meet the applicable requirements.
Specifications
CONTROLLED DATADQ 16x24 V DC/0.5 A BA
16 sourcing outputs
2 groups of 8
24 V DC
0.5 A
4 A
Up to SIL 2 / Category 3 PL d with approved architecture
U-connector and push-in front connector
25 mm
Features
FUNCTIONAL DISTINCTIONSBasic output profile
The BA execution provides defined 24 V DC switching without importing HF-module functions.
Two isolated load groups
Eight channels share each published 4 A group limit.
Connector included
The push-in front connector is part of the delivery package.
Controlled load-group shutdown
The module supports a documented safety-oriented shutdown concept when correctly engineered.
Compatibility
SELECTION BOUNDARIESLoad calculation
Check steady and inrush current for every output and the total for each group.
Project support
Confirm the TIA Portal hardware catalog and configured slot.
Safety circuit
Review external shutdown, diagnostics and proof-test requirements for the installed design.
Replacement
SERVICE WORKFLOWArchive
Save the 6ES7522-1BH10-0AA0 project entry, connector label, output map and load calculations.
Transfer
Isolate both load groups and preserve connector keying and conductor order.
Prove
Command each used output and verify diagnostics, interlocks and any safety shutdown path.
FAQ
CUSTOMER DECISION SUPPORTDoes 6ES7522-1BH10-0AA0 include a front connector?
Yes. Siemens lists the push-in front connector and U-connector in the delivery package.
How are the outputs of 6ES7522-1BH10-0AA0 grouped?
The sixteen channels are arranged as two groups of eight with a published 4 A limit per group.
Can an HF output module replace 6ES7522-1BH10-0AA0 without project changes?
No direct exchange should be assumed; hardware functions, diagnostics and project configuration must be reviewed.
Which loads need special review on 6ES7522-1BH10-0AA0?
Document inductive loads and high inrush currents, then verify suppression and the 0.5 A channel limit.
What proves 6ES7522-1BH10-0AA0 is ready after service?
Record correct module recognition and successful commanded-state, interlock and shutdown tests.
About IndustryParts
https://www.industryparts.com/Controlled handling for 6ES7522-1BH10-0AA0
IndustryParts keeps the submitted 6ES7522-1BH10-0AA0 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
