6ES7532-5HD00-0AB0 is the SIMATIC S7-1500 AQ 4xU/I ST analog output module. Four channels in one group provide configurable voltage or current output ranges with 16-bit resolution and model-specific diagnostics.

The module supports substitute values, reparameterization and calibration in RUN. Delivery includes the infeed element, shielding bracket and shield terminal, while the required front connector is selected separately in screw-terminal or push-in form.

• Provides four analog outputs configurable for standard industrial voltage or current ranges.
• Uses 16-bit conversion for precise actuator and setpoint control.
• Reports channel and module diagnostics through dedicated status indications.
• Supports substitute values for a defined output response during CPU or communication conditions.
• Allows reparameterization and calibration while the system remains in RUN.
• Supports two-wire voltage, four-wire voltage and two-wire current actuator connections.

• SIMATIC S7-1500 systems controlling proportional valves, actuators, drives or process setpoints.
• Four-channel voltage-output applications using 0 to 10 V, 1 to 5 V or bipolar 10 V ranges.
• Current-loop control using 0 to 20 mA, 4 to 20 mA or bipolar 20 mA output ranges.
• Automation installations that use diagnostics and configured substitute values for controlled fault behavior.

• The submitted shortened code 532-5HD00-0AB0 is completed to the Siemens article number 6ES7532-5HD00-0AB0 for this preview.
• Retain the channel parameter set, output types, ranges, substitute values and diagnostic configuration before exchange.
• Confirm that the separately ordered front connector matches the panel wiring method and terminal plan.
• Inspect the included infeed and shielding components and reproduce the shield termination during installation.
• Test each channel under controlled conditions before returning the connected actuator loop to normal operation.