Converts the common DC-link supply into controlled motor power.
Product Identification
6SE7022-6TP60 is a Siemens SIMOVERT MASTERDRIVES Compact PLUS DC-AC inverter for a 510 to 650 V DC link.
Siemens operating instructions list an 11.0 kW rating, 25.5 A rated output current and power-section definition value 16 for this article number.
Replacement planning must preserve the complete TP60 execution, control configuration, motor data and cabinet protection design.
Engineering Data
| Manufacturer | Siemens |
|---|---|
| Exact article number | 6SE7022-6TP60 |
| Product family | SIMOVERT MASTERDRIVES Compact PLUS |
| Conversion | DC-AC inverter |
| DC-link range | 510 to 650 V DC |
| Rated power | 11.0 kW |
| Rated output current | 25.5 A |
| Power-section definition value | 16 |
| Construction | Book / Compact PLUS execution |
| Successor reference in Siemens spare table | 9MC3156-6RF38-2DO0, subject to migration engineering |
Functions
Operates as a Compact PLUS MASTERDRIVES inverter power section.
Uses parameterized motor and control data for the installed axis or process.
Maintains a defined 25.5 A power-section identity for configuration checks.
Applications
- Legacy SIMOVERT MASTERDRIVES motor-control cabinets with a 510 to 650 V DC link.
- Book-format multi-axis arrangements using a shared DC supply.
- Controlled replacement of an existing TP60 inverter after exact label verification.
- Migration projects where motor, control, braking and cabinet interfaces are re-engineered together.
Lifecycle
- Treat the unit as legacy equipment and confirm availability, condition and repair scope at quotation.
- A listed successor does not constitute a drop-in replacement; compare dimensions, terminals, control electronics, motor data and parameter migration.
- Archive the complete parameter set, option boards, connector assignments and fault history.
- Perform insulation, power-stage and motor-direction checks under the approved commissioning procedure.
About IndustryParts
https://www.industryparts.com/Legacy inverter enquiries retain power, control and migration evidence
IndustryParts prepares 6SE7022-6TP60 requests with the exact TP60 identity, parameter archive, option hardware and cabinet interface record.
- 11 kW / 25.5 A identity retained
- Parameter archive requested
- Migration treated as an engineered change
FAQ
Is the Siemens successor listed for 6SE7022-6TP60 a direct drop-in replacement?
No. Siemens lists a migration reference, but the change requires engineering of voltage range, output rating, mechanics, terminals, control interfaces and parameter transfer.
What cabinet evidence should accompany a 6SE7022-6TP60 request?
Provide the full nameplate, DC-link supply, control board identities, option modules, motor data, connector photographs and cabinet clearances.
Why must the power-section definition be checked after 6SE7022-6TP60 service?
The operating instructions associate this inverter with definition value 16; a correct parameter baseline helps prevent a mismatched power-stage configuration.
What should be backed up before removing 6SE7022-6TP60?
Save the complete drive parameter set, motor identification, technology settings, option-board data, fault history and any machine-specific acceptance values.
Which tests should precede return to service?
Verify DC-link polarity and insulation, motor phase order, current feedback, direction, controlled acceleration, braking behavior and every affected interlock.
