Siemens 6SE7024-7ED84-1HF4 SIMOVERT MASTERDRIVES Service Assembly
A complete Siemens 6SE70 service identifier that must be matched to the installed converter rating plate, hardware release and internal interfaces.
Technical Summary
6SE7024-7ED84-1HF4 is a Siemens SIMOVERT MASTERDRIVES 6SE70 service identifier. The complete MLFB is required because the voltage letter, construction code and terminal suffix distinguish electrically and mechanically different assemblies.
For replacement work, the installed converter nameplate and the removed assembly label control the selection. Ratings, semiconductor population and connector layout should not be transferred from a visually similar 6SE7024 variant.
Specifications
| Manufacturer | Siemens |
|---|---|
| Model | 6SE7024-7ED84-1HF4 |
| Product Family | SIMOVERT MASTERDRIVES 6SE70 |
| Component Class | Converter service assembly |
| Identity Basis | Complete MLFB plus installed host nameplate |
| Hardware Release | Match the full assembly label and revision index |
| Electrical Rating | Use the installed Siemens rating plate |
| Internal Interfaces | Compare power, control, feedback and temperature connections |
| Cooling Interface | Verify heat sink, fan path and mounting arrangement |
| Service Control | Use the applicable 6SE70 service procedure for the exact host |
Features
- Preserves the complete Siemens MLFB for legacy 6SE70 maintenance.
- Supports board, power-stage and connector verification against the removed unit.
- Keeps electrical ratings tied to the host nameplate instead of an abbreviated family code.
- Provides a traceable basis for repair, exchange and controlled recommissioning.
Compatibility
- Match every character of the installed 6SE7024-7ED84-1HF4 label.
- Compare the complete converter MLFB, supply data, current class and construction form.
- Confirm semiconductor markings, internal connectors, feedback devices and hardware index.
- Do not substitute a 6SE7024 code with a different voltage or terminal suffix without Siemens engineering approval.
Replacement
- Archive parameters, fault history, nameplates and connector photographs before removal.
- Apply approved lockout, DC-link discharge and ESD procedures before opening the converter.
- After installation, inspect insulation and wiring, restore the controlled parameter set, and complete staged no-load and load tests.
FAQ
6SE7024-7ED84-1HF4: What evidence is needed to avoid a visually similar 6SE70 assembly?
Provide the converter nameplate, removed-part label, hardware index, semiconductor markings, connector photographs and cabinet position.
6SE7024-7ED84-1HF4: Can a shorter 6SE7024 family code be used for quotation?
No. The complete MLFB is needed because suffix characters control the electrical and mechanical configuration.
6SE7024-7ED84-1HF4: What should a repaired-unit test report identify?
Request serial traceability, insulation checks, power-device results, control-interface checks, cooling verification and the tested host configuration.
6SE7024-7ED84-1HF4: Which records should be preserved before an outage exchange?
Save parameters, fault history, firmware information, terminal markings and photographs of every internal connection.
6SE7024-7ED84-1HF4: How should an exchanged assembly be commissioned?
Use controlled precharge, verify diagnostics and feedback, run without load first, and increase load while monitoring current and temperature.
6SE7024-7ED84-1HF4: What should be agreed when the installed label is damaged?
Use the complete cabinet drawings, original bill of material, remaining converter labels and Siemens service records before selecting a replacement.
Recommended Models
| Festo IFB21-03 188844 | 1-XR4-433C | KSB UPA 200-11/7A 150B-24/21 |
| PCB0011A | 1LG4220-4AA60-Z | 1SDA073687R1 |
| S1024-2POS | Mitsubishi A1S63P A2ASCPU A1SJ71LP21GE A1SX81 | Bonfiglioli Vectron VER/S 400-150 |
| BC7300 | CL240 | H1161 |
| VQZ315R-5L01 | 61008J | IF060 |
| AMF Vektek 6951K-02-22 | IQE31-1201U50034 | ABB CT-MVS.21S 1SVR730020R0200 |
| 3RT1055-6NP36 | QBM3020-5 S55720-S236 | G50BB111MHAR2C00 E84DGDVB11242HP |
| 12F5M1D-3AMA | DNC200-131 | 640tc |
| Grundfos CRN1S-21 EM-FGJ-L-E | X20CS1030 | SP-N-86-000-01 |
| DM-RMC-Scaler-C | R37DRS71S4BE05/TF | ABB DO572 1TNE968902R2203 |
