Siemens 6SE7032-2EE85-1JA0 SIMOVERT MASTERDRIVES Snubber RC Network PCB
A SIMOVERT MASTERDRIVES spare board identified as the snubber RC network PCB for the documented rectifier/regenerative unit execution.
Key Information
6SE7032-2EE85-1JA0 is identified in the SIMOVERT MASTERDRIVES spare-parts structure as a snubber RC network printed-circuit board. The full article number is the controlled selection boundary.
The board belongs to the power-section protection path rather than to the control-program memory. Its service suitability therefore depends on the installed converter or rectifier/regenerative unit and the matching Siemens spare-parts documentation.
For controlled service, retain the complete board label, host-unit MLFB, installed circuit position and connection record with 6SE7032-2EE85-1JA0.
Functions
Limit commutation stress
The RC network is used in the documented power section to control the switching transient environment.
Retain host association
The board must remain linked to the complete installed unit MLFB and circuit position.
Control spare identity
The complete 6SE7032-2EE85-1JA0 marking prevents a visually similar MASTERDRIVES board from being selected by appearance alone.
Specifications
| Manufacturer | Siemens | Exact model | 6SE7032-2EE85-1JA0 |
|---|---|---|---|
| Product family | SIMOVERT MASTERDRIVES | Product type | Snubber RC Network PCB |
| Equipment identifier | A601 in the applicable spare-parts record | Selection evidence | Full board label and host-unit MLFB |
| Configuration boundary | Installed power-section execution | ||
Installation
Isolate
Make the converter and every auxiliary supply voltage-free under the approved plant procedure.
Record
Photograph the board label, connectors, conductor routing and installed circuit position before removal.
Match
Confirm 6SE7032-2EE85-1JA0 against the exact host-unit spare-parts list rather than a neighboring 6SE70 article.
Prove
After approved installation, verify power-section diagnostics and the complete controlled startup sequence.
Lifecycle
- Identity custody
- Keep the board label and host-unit MLFB on one maintenance record.
- No family-level substitution
- Do not approve another 6SE70 board solely because its enclosure or connector layout looks similar.
- Service closure
- Retain pre-work diagnostics and the post-installation test record with the removed board.
About IndustryParts
https://www.industryparts.com/Power-section spares stay linked to their host-unit record
IndustryParts keeps the exact board identity, installed-unit evidence and requested quantity together so a quotation can be checked against the service record.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
FAQ
What host information should accompany a 6SE7032-2EE85-1JA0 enquiry?
Provide the full SIMOVERT unit MLFB, serial label, installed board position, connector photographs and requested quantity.
Can a similar 6SE70 snubber board replace 6SE7032-2EE85-1JA0?
Only when the Siemens spare-parts documentation for the exact host unit identifies that article as compatible; visual similarity is not sufficient.
Why should the removed 6SE7032-2EE85-1JA0 be retained during commissioning?
Keeping the original board preserves label and connection evidence until the replacement has passed the approved power-section tests.
What electrical state is required before handling 6SE7032-2EE85-1JA0?
The complete converter and auxiliary supplies must be isolated and verified voltage-free under the site procedure.
What closes a 6SE7032-2EE85-1JA0 replacement record?
A matched article label, documented connections, clean diagnostics and a completed controlled startup provide the service evidence.
Request a model-specific quotation
Send the complete 6SE7032-2EE85-1JA0 label, requested quantity, delivery destination and installed-system context.
