Combines control and pre-charging duties for the documented design-E infeed arrangement.
Technical Summary
6SE7036-0EF85-0EA0 is a Siemens spare control and pre-charging module PET1. Siemens assigns it to design-E infeed units with a phase interface for 380–480 V three-phase, 50/60 Hz systems.
The module is listed as a discontinued product, so exact drive-section identity, installed interface and service route should be confirmed before replacement.
Specifications
| Manufacturer | Siemens |
|---|---|
| Exact article number | 6SE7036-0EF85-0EA0 |
| Product type | Control and pre-charging module PET1 |
| Interface | Phase interface |
| Approved host | Design-E infeed units |
| Supply class | 380–480 V 3 AC |
| Frequency | 50/60 Hz |
| Lifecycle status | Product discontinued |
| UPC | 662643430738 |
| Country of origin | Austria |
| Commodity code | 85389011 |
| Dangerous goods | No |
Features
Includes the phase-interface assignment stated for this exact Siemens spare.
Carries a voltage and frequency boundary that must match the host infeed unit.
Remains serviceable through Siemens spare, repair or exchange channels subject to availability.
Compatibility
- Confirm the complete infeed-unit order number, design size E and 380–480 V supply class.
- Compare the PET1 label, phase-interface connections, board release and adjacent control hardware.
- Use the applicable Siemens drive manual for discharge time, connector handling and precharge checks.
- Do not substitute a visually similar control board from another infeed design or voltage class.
Replacement
- Isolate the mains and prove that the DC link is discharged before accessing the module.
- Label every phase-interface and control connection and record board positions before removal.
- After replacement, inspect the precharge sequence, contactor behavior, phase feedback and diagnostics.
- Retain the full 6SE7036-0EF85-0EA0 identity because the product is discontinued.
FAQ
What host information is required for 6SE7036-0EF85-0EA0?
Provide the infeed-unit order number, design size, line voltage, board release and clear photographs of the phase-interface connections.
Can 6SE7036-0EF85-0EA0 be used in a non-design-E infeed?
Not from this article description alone. Siemens assigns it to design-E units, so another mechanical design requires a documented cross-reference.
Why must the precharge circuit be checked after replacement?
A correct precharge sequence limits DC-link charging stress and confirms that the module, contactor path and feedback signals operate together.
How should the discontinued status affect an enquiry?
Request availability and service options against the exact article, and do not accept a substitute until the host infeed and interface have been compared.
What proves 6SE7036-0EF85-0EA0 is ready for operation?
Confirm a normal precharge sequence, correct phase-interface feedback, clean diagnostics and stable infeed behavior under the approved test procedure.
About IndustryParts
https://www.industryparts.com/Discontinued infeed spares need an exact design record
IndustryParts prepares 6SE7036-0EF85-0EA0 requests with the design-E infeed, voltage class and phase-interface evidence attached.
- Design-E identity retained
- Voltage class confirmed
- Precharge path reviewed
Recommended Models
| DNC-63-125-PPV-A-S6 | UV C 3Y-A1.1 | QAM22.2 |
| PT9541 | Siemens 6AV7885-5AK21-6GA1 | NUM ENTREES 0.6et8.E.24V |
| R57 DT71D8/BMG/HR/TF/IS | EVT013 | Siemens 1FK7103-5AF71-1EA0 |
| DSS02.2-W050-BE12-01-FW | MAC112C-0-HD-2-C/180-A-2/S029 224934 | OGS381 |
| 1PH6131-4NG49-Z | TXA204C | EMME-AS-80-S-LS-AM |
| ME4zrt | SND-L5083RP | Rittal SZ2418 |
| XP10BKB/DC XP10BKB | MAC093A-1-PS-4-C/110-A-0/WI594LV/S005 | X20AI4622 |
| DE4-BM4-1 00405986 | Moore 41N15 NULLMATIC | RP128KCLPILA |
| 6FX1111-1AA01 | IBS KBU 812 | MPM2400 |
| KS-BE-04.0-090-000-01-00 | ALFA2500BPB | EYL0001V0010L02J01 |
