Siemens 6SE7038-6GL84-1BG2 IVI Inverter Interface Module
A SIMOVERT MASTERDRIVES inverter-interface assembly whose full MLFB and host converter identity govern replacement.
Product Identification
Siemens 6SE7038-6GL84-1BG2 identifies an IVI inverter interface module within the SIMOVERT MASTERDRIVES hardware platform. The BG2 suffix is part of the controlled execution and must remain intact.
The module belongs to the internal power-stage interface, so suitability cannot be established from the 6SE7038 frame prefix alone. Host converter MLFB, board label, connector map and power-section record are required.
Where the exact manufacturer record is sparse, this page deliberately avoids assigning ratings that belong to the surrounding converter rather than the board.
Engineering Data
Siemens
6SE7038-6GL84-1BG2
SIMOVERT MASTERDRIVES
IVI inverter interface
BG2
Internal drive power-stage interface
Complete converter and board labels
Connector map, revision and host power-section identity
Functions
Interface coordination
Provides the inverter-side interface functions assigned to the IVI assembly in the host converter.
Execution control
The complete BG2 order string separates this board from visually similar MASTERDRIVES interfaces.
Connector-defined integration
Installed harness positions and board mating points form part of the service identity.
Legacy hardware continuity
An exact record supports controlled maintenance of the installed MASTERDRIVES power section.
About IndustryParts
https://www.industryparts.com/Traceable handling for 6SE7038-6GL84-1BG2
IndustryParts keeps the submitted 6SE7038-6GL84-1BG2 identity, quantity and installed-system evidence together so the proposed supply can be checked before dispatch.
Suffix and revision kept visible
Installed application boundary documented
Supply record linked to the exact enquiry
Applications
Existing MASTERDRIVES converter
Use only after the full host converter MLFB and original IVI label have been reconciled.
Board-level service planning
Suitable for documented spare or repair activity where connector and revision evidence is available.
Controlled power-section maintenance
Supports work performed under the converter-specific Siemens service instructions.
Lifecycle
Identify
Photograph the complete converter, board and adjacent assembly labels before disconnecting anything.
Map
Record every plug designation, orientation, cable destination, fastener and insulating component.
Prove
After approved repair, confirm control supplies, diagnostics and power-stage operation through staged commissioning.
FAQ
Q01
What should accompany a 6SE7038-6GL84-1BG2 quotation request?
+
Send the complete converter MLFB, original IVI label, board revision, connector photographs, cabinet reference and requested quantity.
Q02
Can the 6SE7038 prefix alone identify a replacement for 6SE7038-6GL84-1BG2?
+
No. The remaining fields, especially the 1BG2 execution, and the host converter record are essential.
Q03
Why are drive current and voltage ratings not stated as 6SE7038-6GL84-1BG2 board data?
+
Those ratings describe the host converter configuration; they should only be assigned after the exact Siemens converter document is matched.
Q04
Which precautions matter when handling 6SE7038-6GL84-1BG2?
+
Follow the converter isolation and discharge procedure, apply ESD controls and preserve every connector and insulating part in its documented position.
Q05
What evidence supports return to service after a 6SE7038-6GL84-1BG2 exchange?
+
Retain board recognition, clear diagnostics, stable internal supplies and the approved staged converter functional-test record.
