Siemens 6SL3000-0BE25-5DA0 55 kW Basic Line Filter
An IP20 SINAMICS S120 Basic Line Filter for the specified 55 kW Active Line Module supply path.
Key Information
6SL3000-0BE25-5DA0 is the SINAMICS S120 Basic Line Filter for a 55 kW Active Line Module. Siemens publishes 380–480 V three-phase line voltage, 47–63 Hz frequency and 105 A rated current for this execution.
The filter is an engineered line-side component rather than a general-purpose replacement. It is paired in the catalog with Active Line Module 6SL3130-7TE25-5AA3 and must be coordinated with the complete supply arrangement.
The IP20 unit uses screw terminals, accepts 50 mm² line conductors and provides an M8 protective-earth connection. Published net weight is approximately 11.5 kg.
Functions
Line-side filtering
Provides the specified Basic Line Filter function ahead of the compatible Active Line Module.
Supply-path coordination
Works within the documented 380–480 V three-phase SINAMICS S120 line arrangement.
Conducted-disturbance control
Supports the manufacturer-defined line configuration when installed with the approved components.
Protective-earth integration
Provides the published M8 PE connection for the cabinet bonding design.
Specifications
- Manufacturer
- Siemens
- Exact model
- 6SL3000-0BE25-5DA0
- Product family
- SINAMICS S120
- Filter type
- Basic Line Filter
- Matched Active Line Module power
- 55 kW
- Line voltage
- 380–480 V 3 AC
- Line frequency
- 47–63 Hz
- Rated current
- 105 A
- Power loss
- 43 W
- Line conductor
- 50 mm²
- Protective earth
- M8
- Degree of protection
- IP20
About IndustryParts
https://www.industryparts.com/Line-filter selection is treated as a system decision
IndustryParts keeps the filter article, matched Active Line Module, supply voltage and cabinet evidence together to avoid rating-only substitutions.
Installation
Verify the supply architecture
Confirm line voltage, prospective fault level, protection, reactor or filter arrangement and matched Active Line Module.
Maintain clearances and bonding
Use the cabinet dimensions, conductor size and M8 protective-earth connection specified for the filter.
Commission the complete line path
Check phase sequence, protective devices, precharge behavior and drive diagnostics before enabling the machine.
Lifecycle
Thermal inspection
Review terminal condition, ventilation and evidence of heating during planned shutdowns.
System documentation
Keep filter, line module, protection and conductor records together with 6SL3000-0BE25-5DA0.
Like-for-like control
Do not replace the filter by current rating alone; topology and compatible SINAMICS components must match.
Related Models
FAQ
Which Active Line Module is paired with 6SL3000-0BE25-5DA0?
Siemens catalog data pairs this filter with the 55 kW 6SL3130-7TE25-5AA3 Active Line Module.
What current and voltage apply to 6SL3000-0BE25-5DA0?
The published values are 105 A and 380–480 V three-phase AC at 47–63 Hz.
Can 6SL3000-0BE25-5DA0 be selected only by 55 kW rating?
No. The line topology, compatible module, voltage, protection, conductor and cabinet arrangement must all be reviewed.
What enclosure consideration applies to 6SL3000-0BE25-5DA0?
It is an IP20 component and therefore depends on a suitable cabinet for environmental and contact protection.
What evidence closes installation of 6SL3000-0BE25-5DA0?
Retain torque and bonding checks, conductor verification, line-module identity, diagnostics and the supervised energization record.
