Siemens 6SL3053-0AA00-3AA0 SINAMICS VSM10 Voltage Sensing Module
Original VSM10 module for line-voltage sensing in compatible SINAMICS Active and Smart Infeed systems.
01Overview
Siemens 6SL3053-0AA00-3AA0 is the original SINAMICS VSM10 Voltage Sensing Module used to measure line voltage in compatible S120 Active Infeeds, S120 Smart Infeeds and SINAMICS S150 cabinet units. The original version senses the line through high-resistance chains referenced to ground, producing a documented insulation resistance of 0.625 M惟 in the applicable system. Siemens later introduced 6SL3053-0AA00-3AA1 with galvanic separation, so replacement requires special attention to the X530 jumper instruction.
02Specs
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3053-0AA00-3AA0 |
| Product Designation | SINAMICS Voltage Sensing Module VSM10 |
| Hardware Generation | Original VSM10 version |
| Primary Function | Line-voltage sensing |
| Documented Systems | S120 Active Infeeds, S120 Smart Infeeds and SINAMICS S150 |
| Sensing Principle | High-resistance chains referenced to ground |
| Documented System Insulation Resistance | 0.625 MΩ |
| Revised Article | 6SL3053-0AA00-3AA1 |
| Critical Replacement Rule | Do not remove the X530 jumper on the 3AA1 replacement when replacing a 3AA0 module |
03Features
Key Functions
- Measures the line voltage required by compatible SINAMICS infeed systems.
- Supports Active Infeed and Smart Infeed operation in the officially documented applications.
- Uses the original resistance-chain design referenced to ground.
- Communicates the sensed line-voltage information within the SINAMICS system architecture.
- Has a documented system-insulation characteristic that differs from the revised 3AA1 hardware.
- Requires a specific X530 jumper condition when the original module is replaced by the revised version.
Product Identity
- Manufacturer: Siemens
- Model: 6SL3053-0AA00-3AA0
- Product Type: SINAMICS VSM10 Voltage Sensing Module, original version
- Status: Legacy version; revised successor available
04Applications
- Installed S120 Active Infeed systems using the original VSM10 design.
- S120 Smart Infeed configurations requiring line-voltage sensing.
- SINAMICS S150 cabinet units fitted with article 6SL3053-0AA00-3AA0.
- Maintenance diagnosis of legacy VSM10 line-voltage sensing circuits.
- Controlled replacement by the revised 6SL3053-0AA00-3AA1 article under Siemens instructions.
05Lifecycle
- The 3AA0 is the original VSM10 generation; Siemens documents the revised 3AA1 module as the replacement hardware.
- When replacing 3AA0 with 3AA1, the connector jumper at terminal X530 must not be removed.
- Removing that jumper in this replacement case can create hazardous voltage, as stated in the Siemens equipment manual.
- Record the host Active Interface Module, Smart Line Module or S150 configuration before service work.
- After replacement, verify line-voltage sensing, identification, insulation behavior, diagnostics and safe operation of the infeed.
06FAQ
What does 6SL3053-0AA00-3AA0 measure?
It is the original SINAMICS VSM10 used for line-voltage sensing in compatible infeed systems.
Which SINAMICS applications are documented for the original VSM10?
Siemens documents its use with S120 Active Infeeds, S120 Smart Infeeds and SINAMICS S150 cabinet units.
What insulation resistance is associated with the original sensing design?
The official engineering manual states 0.625 M惟 for the applicable infeed or cabinet system using the original grounded resistance-chain design.
Which revised VSM10 article follows the 3AA0 version?
Siemens identifies 6SL3053-0AA00-3AA1 as the revised module with galvanic separation.
What must happen to jumper X530 during a 3AA0-to-3AA1 replacement?
The jumper on terminal X530 of the 3AA1 replacement must not be removed.
Why is the replacement procedure safety-critical?
Incorrect jumper handling can produce hazardous voltage in the associated Active Interface Module or Smart Line Module, so the Siemens procedure must be followed exactly.
+Recommended Models
| 4930275 | ETRSEQ.0003 | SL-2000-P |
| CF10-50N | 7012AC | 520AOD01 ABB 1KGTO24500R0001 |
| 03671 | Times-7 A1001 | MX153 |
| 1SDA067110R1 | TB-ASP-W1 SXWTBASW110002 | BT-F411/1N |
| 759559-583-117 | CLAXEH00ND100A | GX1230 |
| V-U0047 839-000540 | AIR-ANT5114P2M-N | AB444200035 |
| Ca-3 | FMZ5000 903466 | KFD2-SD-Ex1.17 |
| SPD910-1000PA | 5714C | 3UG4614-1BR20 |
| CCH-CS | CW-MX-ISO | ABB TP857 / 3BSE030192R1 |
| ABB RXSF1-220-250V | USB32DVIPRO | 4930270 |
