Provides the CompactFlash medium used by a compatible SINAMICS S120 control environment.
Product Overview
6SL3054-0EF00-1BA0-Z identifies a Siemens SINAMICS S120 CompactFlash card configuration in the V4.5 generation without performance expansion.
The trailing -Z is a configurable-product marker, not a complete option definition. A valid order and replacement decision requires the option code that follows -Z on the installed label or order record; no Safety license is inferred here.
Performance
Carries the software and license configuration defined by the complete MLFB and appended -Z option code.
Preserves V4.5-generation compatibility when the host Control Unit and project record agree.
Separates the base no-performance-expansion identity from optional licensed functions.
Technical Details
| Manufacturer | Siemens |
|---|---|
| Drive family | SINAMICS S120 |
| Media type | CompactFlash card |
| Software generation | V4.5 |
| Performance expansion | Without performance expansion |
| Configuration marker | -Z; appended option code required |
| License definition | Determined by the missing -Z option code and certificate |
| Compatibility basis | Control Unit, project version and complete card label |
System Integration
- Read the complete card label, including every code after -Z, before ordering or cloning the replacement.
- Record the Control Unit MLFB, firmware generation, project archive and installed license certificate.
- Use the Siemens backup and card-handling procedure; remove power and protect the medium from ESD and file corruption.
- Validate startup, topology, project checksum and every licensed function before returning the drive to operation.
Applications
- SINAMICS S120 maintenance where the host documentation requires the V4.5 card generation.
- Configuration recovery when the complete -Z option and license record are available.
- Controlled legacy-spare planning for installed drive systems.
FAQ
Is 6SL3054-0EF00-1BA0-Z a complete orderable MLFB?
Not by itself. The -Z marker requires one or more appended option codes. Supply the complete label or order record before procurement.
Can a Safety license be assumed for 6SL3054-0EF00-1BA0-Z?
No. Safety and other licenses are defined by the appended option code and license certificate; none should be inferred from -Z alone.
What files should be backed up before replacing 6SL3054-0EF00-1BA0-Z?
Keep the validated SINAMICS project, firmware and topology record, parameters, license evidence and original card label photographs.
Can a newer SINAMICS CompactFlash card directly replace 6SL3054-0EF00-1BA0-Z?
Compatibility depends on Control Unit hardware, firmware, project migration and licenses. Use a documented Siemens migration path rather than a physical fit check.
What should receiving inspection verify for 6SL3054-0EF00-1BA0-Z?
Confirm the full option-complete MLFB, software generation, license certificate, sealed media condition and compatibility with the intended Control Unit.
About IndustryParts
https://www.industryparts.com/The option after -Z is treated as mandatory identity
IndustryParts does not convert the incomplete 6SL3054-0EF00-1BA0-Z base into an assumed license package; the full label is requested before supply.
- Option code requested
- License evidence checked
- Project generation retained
Recommended Models
| HLGS2-050F811 2040341 | FIS-3000-0001 | MGP808NC |
| FPA10DK GF7013011A | NTM1A10C | 45-D2-0940-20-27.5-G1-V3-SW-ST-GP |
| KRAUSS MAFFEI R900972657 + R900973377 | System Sensor ECO1003 | EGT1SEM4 019727 |
| 6H1-100/5H1-50R | 019073 | BKM-320D |
| ZB12-10 | SAF37 CM71S/BR/TF/RH1L/AV1Y/SB50 | C-BUS2 |
| 6DS1605-8AA | OBi302 2200-49532-012 | 813S-V3-400V |
| YN44PBV3 | VITRUM 01B010020 | DMC-HDO 6507169 |
| DNC-63-125-PPV-A 163406 | CS-AMS8 RS485 | MPA2 |
| Nabtesco RV-320E-141 P65E021K00 | MCS 09H41LRS0P2-B14N-ST5S00N-R0SU | OT100P25+20 D/G18P1 PS1207104D |
| P500/762 | 7A00223748700 | TSW-1060-LB-B |
