Provides local operation and status access for a compatible SINAMICS drive system.
Product Identification
6SL3055-0AA00-4CA5 is the Siemens SINAMICS AOP30 operator panel execution described as language-neutral and equipped with memory expansion.
Siemens specifies this execution for firmware V2.4 or higher. The installed drive family, firmware, panel cable and mounting arrangement must be confirmed together.
Engineering Data
| Manufacturer | Siemens |
|---|---|
| Exact article number | 6SL3055-0AA00-4CA5 |
| Product family | SINAMICS |
| Product type | AOP30 operator panel |
| Language execution | Language-neutral |
| Memory | Expanded-memory execution |
| Firmware requirement | V2.4 or higher |
| Quantity unit | 1 piece |
| Country of origin | Austria |
Functions
Uses the AOP30 interface and expanded-memory hardware documented for this article.
Supports the firmware generation specified by Siemens for this execution.
Maintains an exact article identity for service, repair and exchange.
Applications
- Local commissioning and service access on compatible SINAMICS drive installations.
- Replacement of an installed AOP30 where article number, firmware and connection hardware match.
- Operator access in cabinet or panel arrangements approved for the host drive.
- Drive diagnostics and parameter work performed under the site change-control procedure.
Lifecycle
- Record the host drive type, Control Unit, firmware release and existing AOP30 article before ordering.
- Back up drive parameters through the approved method before panel or firmware service.
- Inspect the panel cable, connector and cabinet mounting before blaming the AOP30 for intermittent communication.
- After exchange, verify panel startup, language resources, access rights and communication with the drive.
About IndustryParts
https://www.industryparts.com/Operator-panel enquiries include firmware and host-drive context
IndustryParts prepares 6SL3055-0AA00-4CA5 requests with the SINAMICS firmware, Control Unit and panel hardware aligned.
- V2.4-or-higher requirement checked
- Host drive recorded
- Panel cable reviewed
FAQ
What firmware evidence is needed for 6SL3055-0AA00-4CA5?
Provide the SINAMICS Control Unit, firmware release, drive family and current AOP30 startup information.
Can an older AOP30 be exchanged with 6SL3055-0AA00-4CA5 automatically?
Not without review; Siemens identifies this memory-expanded execution for firmware V2.4 or higher.
What accessories should be confirmed with 6SL3055-0AA00-4CA5?
Check the panel cable, connector type, cabinet mounting hardware and any required memory or service items.
What should be checked when the AOP30 loses communication?
Inspect the cable and connectors, host drive power, Control Unit status and firmware compatibility before replacing the panel.
What proves a replacement AOP30 is commissioned?
Confirm normal startup, correct drive identification, parameter access, diagnostics and stable communication during operation.
