go on
Home>PLC>Siemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module

Hot Categories

Siemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module

Siemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module

Item NO.: 3749052
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module
  • Item NO.3749052
  • Weight5.0000 kg = 11.0231 lb = 176.3698 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-27
  • SINAMICS S120 5 A Single Motor Module
Siemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module

Siemens 6SL3120-1TE15-0AA4 SINAMICS S120 5 A Single Motor Module

A 5 A AA4 Motor Module with 15 A maximum current, integrated X1 connector and extended safety support.

ManufacturerSiemensModel6SL3120-1TE15-0AA4Product TypeSINAMICS S120 5 A Single Motor Module, booksize

01Product Overview

Siemens 6SL3120-1TE15-0AA4 is a 5 A booksize Single Motor Module for SINAMICS S120. Its official data sheet documents 5.0 A rated current, 4.3 A base-load current, 6.0 A S6 current and 15.0 A maximum current. This AA4 version uses an integrated X1 motor connection and is currently positioned as a spare-part article, so it must not be confused with either the lower-peak AA3 or terminal-connected AD0 hardware.

Variant ControlVerify the exact suffix, current profile, connector generation, cooling, firmware, DRIVE-CLiQ topology and safety configuration.

02Performance

Verified Performance

  • 5.0 A rated output for one motor axis.
  • 4.3 A base-load current and 6.0 A S6 40 percent duty current.
  • 15.0 A maximum current for the AA4 generation.
  • 2.7 kW type rating at the documented operating point.
  • Typical / maximum power loss of 0.04 / 0.07 kW.
  • Internal air cooling with 0.008 m3/s airflow and 60 dB sound-pressure data.

Exact Product Identity

  • Manufacturer: Siemens
  • Model: 6SL3120-1TE15-0AA4
  • Product Type: SINAMICS S120 5 A Single Motor Module, booksize
  • Status: Spare-part article; later D-type article requires compatibility review

03Technical Details

Manufacturer Siemens
Article Number 6SL3120-1TE15-0AA4
Product Type SINAMICS S120 Single Motor Module
DC-Link Voltage 510 to 720 V DC
Electronics Supply 24 V DC, -15% / +20%
Rated / Base-Load Current 5.0 A / 4.3 A
S6 / Maximum Current 6.0 A / 15.0 A
Rated Power 2.7 kW
Rated Pulse Frequency 4 kHz
Motor Connection Integrated X1 connection plug
Motor Cable Length 50 m shielded / 75 m unshielded
Safety Integrated SIL 2, PL d, Category 3
Operating Temperature 0 to 40 degrees C
Degree of Protection IP20 / UL open type

04System Integration

  • Identify the integrated X1 connector arrangement before planning a hardware exchange.
  • Keep the DC-link and 24 V busbar loading within 100 A and 20 A respectively.
  • Match the drive-object firmware and optimized pulse-pattern settings to the existing project.
  • Verify the included DRIVE-CLiQ cable and reconnect the documented topology.
  • Treat extended Safety Integrated configuration as safety-relevant and repeat the acceptance procedure.
  • Check whether migration to 6SL3120-1TE15-0AD0 changes the terminal, airflow or mechanical service plan.

05Applications

  • Single-axis S120 booksize drives requiring a 5 A rated module.
  • Service replacement in machines built around the AA4 connector generation.
  • Servo axes using extended Safety Integrated functions.
  • Machine-tool and handling axes with short-duration current demand up to the documented 15 A maximum.
  • Cabinet lineups using integrated DC-link and 24 V busbars.
  • Lifecycle projects evaluating a controlled move from AA4 to D-type hardware.

06FAQ

What is the maximum current of this AA4 module?

The official data sheet specifies 15.0 A maximum current.

Does this article use a terminal block?

The AA4 data sheet identifies an integrated X1 connection plug at the motor end.

How long may the motor cable be?

The documented maximum is 50 m shielded or 75 m unshielded.

Which safety level is documented?

Siemens lists SIL 2, PL d and Category 3 for the supported Safety Integrated functions.

Is the AD0 article automatically interchangeable?

No. The D-type article must be checked for connector, hardware, firmware, project and safety compatibility.

What cooling data applies to AA4?

The module uses internal air cooling with a documented requirement of 0.008 m3/s.

You May Also Like