go on
Home>PLC>Siemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module

Hot Categories

Siemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module

Siemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module

Item NO.: 3749734
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module
  • Item NO.3749734
  • Weight8.6000 kg = 18.9598 lb = 303.3561 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-28
  • SINAMICS S120 60 A C-Type Motor Module
Siemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module
SINAMICS S120 | Booksize Motor Module

Siemens 6SL3120-1TE26-0AC0 SINAMICS S120 60 A C-Type Motor Module

Active 60 A C-type module with 120 A peak current and a compact 100 mm power section.

ManufacturerSiemensModel6SL3120-1TE26-0AC0Product TypeSINAMICS S120 booksize C-type Single Motor Module

01Product Profile

Siemens 6SL3120-1TE26-0AC0 is the active 60 A C-type Single Motor Module for SINAMICS S120. It provides 51 A base-load current, 80 A S6 current and 120 A peak current from a 510 to 720 V DC link. The 100 mm C-type construction is narrower and thermally different from the discontinued 0AA3 module. It supports optimized pulse patterns, extended Safety Integrated functions and DRIVE-CLiQ integration for current S120 booksize systems.

Configuration BoundaryMatch the exact article, motor duty, DC-link design, power terminals, cooling, firmware and Safety Integrated project.

02Technical Data

Manufacturer Siemens
Article Number 6SL3120-1TE26-0AC0
Product Family SINAMICS S120
Construction Booksize C-type, internal air cooling
DC Link / Electronics Supply 510 to 720 V DC / 24 V DC
Rated / Base-Load Current 60.0 A / 51.0 A
S6 / Peak Current 80.0 A / 120.0 A
Type Rating at IN / IH 32.0 kW / 28.0 kW
DC-Link Current / Capacitance 72.0 A / 1,410 µF
Motor Connection M6 bolt (X1), 2.5 to 50 mm²
Motor Cable Length 100 m shielded; 150 m unshielded
Cooling-Air Requirement 0.023 m³/s
Power Loss, Typical / Maximum 0.46 kW / 0.47 kW
Protection / Dimensions IP20; 100 x 380 x 270 mm
Lifecycle Active product

03System Role

Drive-System Function

  • Converts the shared S120 DC link into a controlled 60 A motor output.
  • Provides a twofold 120 A peak-current value for the C-type duty profile.
  • Uses a 100 mm-wide power section with 0.023 m³/s cooling air.
  • Supports 100 m shielded and 150 m unshielded motor-cable limits.
  • Implements extended Safety Integrated functions in the supported control system.
  • Uses DRIVE-CLiQ for communication, diagnostics and electronic component identification.

Product Identity

  • Manufacturer: Siemens
  • Model: 6SL3120-1TE26-0AC0
  • Product Type: SINAMICS S120 booksize C-type Single Motor Module
  • Status: Active product

04Compatibility

  • Select by the exact 0AC0 suffix and its 51 A base-load / 120 A peak profile.
  • Do not copy the AA3 52 A base-load, 113 A maximum-current or 150 mm width values.
  • Confirm Control Unit firmware, DRIVE-CLiQ topology, motor data, encoder and safety project.
  • Check busbar current, additional 24 V feeds and the complete cabinet heat balance.
  • Use the documented M6 X1 connection and M6 protective-earth point.
  • Maintain IP20 enclosure protection and the 0 to 40 °C non-derated operating range.

05Applications

Engineering Use

  • Current 60 A axes whose peak-current requirement fits the 120 A C-type limit.
  • Cabinet modernization where the narrower 100 mm module is mechanically engineered.
  • Drive groups using 510 to 720 V DC with calculated shared-bus loading.
  • Motor installations requiring a bolted connection and conductor sizes up to 50 mm².
  • Replacement of an AA3 position after project, wiring, cooling and safety validation.

06FAQ

What peak current is available from 6SL3120-1TE26-0AC0?

The Siemens data sheet specifies 120.0 A.

What makes the AC0 mechanically different from the AA3 predecessor?

The AC0 is 100 mm wide, compared with 150 mm for the AA3 article.

Which base-load current applies to this exact C-type module?

The documented IH value is 51.0 A.

What are the AC0 power-loss values?

Siemens specifies 0.46 kW typical and 0.47 kW maximum.

Which product lifecycle applies to 0AC0?

Siemens lists 6SL3120-1TE26-0AC0 as an active product.

What must be validated after an AA3-to-AC0 migration?

Verify mounting, busbars, cooling, cables, detected power section, current limits, motor control and all safety functions.

You May Also Like