Siemens 6SL3120-1TE31-3AA3 SINAMICS S120 132 A Single Motor Module
Active 132 A booksize module with 210 A maximum current and a 300 mm power section.
01Product Profile
Siemens 6SL3120-1TE31-3AA3 is an active 132 A SINAMICS S120 Single Motor Module for high-current booksize installations. The exact data sheet lists 105 A base-load current, 150 A S6 current and 210 A maximum current. Its 300 mm-wide, 629 mm-high construction differs substantially from the smaller 85 A module even though both use internal air cooling. The 132 A article also requires 0.144 m³/s cooling air and has a 2,820 µF DC-link capacitance.
02Technical Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3120-1TE31-3AA3 |
| Product Family | SINAMICS S120 |
| Construction | Booksize, internal air cooling |
| DC Link / Electronics Supply | 510 to 720 V DC / 24 V DC |
| Rated / Base-Load Current | 132.0 A / 105.0 A |
| S6 / Maximum Current | 150.0 A / 210.0 A |
| Type Rating at IN / IH | 71.0 kW / 57.0 kW |
| DC-Link Current / Capacitance | 158.0 A / 2,820 µF |
| Motor Connection | M8 bolt (X1), 2.5 to 120 mm² |
| Motor Cable Length | 100 m shielded; 150 m unshielded |
| Cooling-Air Requirement | 0.144 m³/s |
| Power Loss, Typical / Maximum | 1.26 kW / 1.29 kW |
| Lifecycle | Active product |
03System Role
Drive-System Function
- Delivers 132 A rated current for one S120 motor axis.
- Provides a 210 A maximum-current value and 150 A S6 current.
- Uses a 300 mm-wide, 629 mm-high booksize enclosure.
- Supports conductors up to 120 mm² at the M8 X1 connection.
- Requires 0.144 m³/s internal cooling airflow.
- Integrates optimized pulse patterns, extended Safety Integrated functions and DRIVE-CLiQ.
Product Identity
- Manufacturer: Siemens
- Model: 6SL3120-1TE31-3AA3
- Product Type: SINAMICS S120 booksize Single Motor Module
- Status: Active product
04Compatibility
- Verify the 132 A article separately from the 85 A and 200 A modules.
- Reserve the full 300 x 629 x 270 mm installation envelope and 21 kg handling capacity.
- Account for 1.29 kW maximum power loss in cabinet thermal design.
- Confirm busbar and 24 V distribution limits in the complete module row.
- Check motor current, cable length, feedback, firmware and DRIVE-CLiQ topology.
- Validate Safety Integrated functions after commissioning or hardware replacement.
05Applications
Engineering Use
- High-current axes requiring a 71 kW type rating at rated current.
- Large cabinet systems designed around the 300 mm / 629 mm module envelope.
- Motor circuits using cable conductors up to 120 mm².
- S120 drive groups whose line module and DC link can support 158 A module current.
- Industrial motion or vector-control axes operating within the documented current and frequency limits.
06FAQ
What base-load current is specified for the 132 A module?
The official IH value is 105.0 A.
How high is the maximum current?
Siemens specifies 210.0 A for 6SL3120-1TE31-3AA3.
Why does this module need more cabinet height than the 85 A model?
Its data sheet specifies a 629 mm height and 300 mm width for the 132 A power section.
What is the maximum conductor cross-section at X1?
The M8 connection accepts conductors up to 120 mm².
Which cooling-air figure applies to this exact article?
The documented requirement is 0.144 m³/s.
What type rating is listed at rated current?
Siemens lists 71.0 kW for a typical 400 V three-phase asynchronous motor.
+Recommended Models
| 1SAP240000R0001 DI524 | ABB 2CDG110072R0011 | 4098-5260 4B-C |
| 5500paca | ABB AT/S 4.16.5 | CS4-40/400 |
| KFD2-SD-Ex1.17 | EL5401D8011 | IO88B02KNX-C |
| 5ST3 | EFCB12W-OE1 | XU1DC2 |
| SMART-G4 SB-6B0-10V-DN | ODW-631-SM-LC15 | 160-2535-5 |
| M-ME-C202.32 | 2001810000 | VC6931-11 VC6931AB1111/U |
| ABB CM-MSS / 1SVR430801R1100 | 60-1026-81 | VAN-115/230AC-K8 |
| 175G9047 | KCD2-SCD-EX1 | VE3A11701 |
| ABB 68249660 VHP-5 | ABB 2CDG 110 167 R0011 | UC600 X13651548010 |
| SPS 201 A | EW300G2 | RDK9 |
