6SL3130-1TE24-0AA0 is a booksize Basic Line Module that supplies the common DC link of a modular SINAMICS S120 drive system. Its 40 kW rating, 67 A DC output and internally air-cooled construction identify a specific line-side power stage for coordinated multi-axis or single-axis arrangements.

Manufacturer	Siemens
Order Number	6SL3130-1TE24-0AA0
Product Family	SINAMICS S120
Module Type	Basic Line Module
Line Input	3-phase 380–480 V AC
Input Frequency	50/60 Hz
DC-Link Output	600 V DC
Rated DC Output Current	67 A
Rated Power	40 kW
Construction	Booksize
Cooling Method	Internal air cooling
System Connection	DRIVE-CLiQ cable included
Product Lifecycle	PM300 Active Product

• Feeds the shared SINAMICS S120 DC-link bus from the three-phase plant supply.
• Supports a modular drive line-up in which downstream Motor Modules draw power from the common DC link.
• Uses an internally air-cooled booksize format for coordinated cabinet assembly.
• Includes the DRIVE-CLiQ cable needed for integration into the drive topology.
• Keeps the full 0AA0 hardware suffix visible for accurate engineering and spare-parts control.

• Designed for the SINAMICS S120 modular drive platform and its common DC-link architecture.
• The downstream Motor Module load and duty cycle must remain within the engineered line-module capacity.
• Line-side protection, line components, cabinet airflow and earthing must follow the applicable Siemens system documentation.
• The complete DRIVE-CLiQ topology and control-unit project must be checked during commissioning.
• Adjacent Basic, Smart and Active Line Modules have different operating characteristics and are not interchangeable by rating alone.

• Match the complete order number, 40 kW power class, 67 A DC rating and internal-air-cooling design before replacement.
• Back up the drive project and record the installed DC-link and DRIVE-CLiQ topology before removing the module.
• Inspect line-side protection, busbar connections, fans and cabinet airflow while the drive group is de-energized.
• Do not treat a Smart Line Module or Active Line Module as a drop-in alternative without a new Siemens system review.
• After exchange, verify precharge behavior, DC-link voltage, topology recognition and downstream axis operation.

What role does 6SL3130-1TE24-0AA0 perform in an S120 system?

It converts the three-phase line supply into the 600 V DC-link supply used by compatible SINAMICS S120 Motor Modules.

What is the rated power of this Basic Line Module?

The official product data identifies a 40 kW rating with a rated DC output current of 67 A.

Is this module regenerative?

It is a Basic Line Module; any requirement for controlled regenerative operation must be evaluated against the appropriate Siemens line-module family.

How is 6SL3130-1TE24-0AA0 cooled?

This exact order number uses internal air cooling in the booksize construction.

Is a DRIVE-CLiQ cable supplied?

Yes. The official Siemens product description states that a DRIVE-CLiQ cable is included.

What should be checked before ordering a service replacement?

Confirm the full order number, input range, power class, cooling method, DC-link arrangement and compatible drive topology.