Siemens 6SL3130-7TE28-0AB0 SINAMICS S120 Active Line Module 80 kW
A legacy 80 kW SINAMICS S120 Active Line Module variant for 380–480 V three-phase systems, identified by the exact 0AB0 suffix.
Product Overview
Siemens 6SL3130-7TE28-0AB0 is an older internally air-cooled SINAMICS S120 Active Line Module in the 80 kW class. The exact 0AB0 order suffix is essential because current 80 kW engineering and compatibility information centers on the later 0AA3 article.
Performance
- Provides the Active Line infeed role for an 80 kW S120 drive configuration.
- Designed for a 380–480 V three-phase line class.
- Uses internal air cooling in the booksize power-section format.
- Supports regenerative infeed operation as part of the correctly engineered Active Line system.
- Requires suffix-specific review before reuse, repair, replacement or migration.
Technical Details
| Manufacturer | Siemens |
|---|---|
| Order Number | 6SL3130-7TE28-0AB0 |
| Product Family | SINAMICS S120 |
| Module Type | Active Line Module |
| Nominal Line Input | 3-phase 380–480 V AC |
| Line Frequency | 50/60 Hz |
| Rated Power | 80 kW |
| Construction | Booksize |
| Cooling | Internal air cooling |
| Variant Identifier | 0AB0 legacy hardware suffix |
| Current 80 kW Reference Article | 6SL3130-7TE28-0AA3 |
| Current 80 kW Active Interface Module | 6SL3100-0BE28-0AB0 |
| Compatibility Handling | Exact legacy hardware and drive project must be reviewed |
System Integration
- Preserve the original nameplate, drive project, Control Unit, firmware and line-side component list.
- Check the installed Active Interface Module and all interconnecting hardware rather than assuming the current pairing.
- The current Siemens CU320-3 compatibility table names 0AA3, not this legacy 0AB0 article.
- Verify cabinet mechanics, air path, busbars, line protection and DRIVE-CLiQ topology before exchange.
- Treat migration to a current 80 kW article as an engineered change, not a suffix-only substitution.
Applications
- Brownfield maintenance of S120 installations carrying the exact 0AB0 nameplate.
- Repair-versus-replacement assessment for legacy 80 kW infeed hardware.
- Asset documentation and spare-strategy review for older drive cabinets.
- Migration studies toward current Siemens 80 kW Active Line hardware.
- Controlled service work where the original drive project remains available.
FAQ
What type of device is 6SL3130-7TE28-0AB0?
It is a legacy SINAMICS S120 Active Line Module in the 80 kW, internally air-cooled class.
Why is the 0AB0 suffix important?
It identifies a specific older hardware variant and must be retained in service and procurement records.
Is 0AA3 automatically interchangeable with 0AB0?
No. Hardware, Control Unit, firmware, line components, cabinet mechanics and project compatibility must be reviewed.
Does the current CU320-3 compatibility table list 0AB0?
No. The current Siemens table identifies the later 6SL3130-7TE28-0AA3 article.
What should be captured before removing the legacy module?
Record the complete nameplate, drive project, Control Unit, Active Interface Module, line equipment, DC-link layout and cabinet connections.
Can the module be selected only by its 80 kW rating?
No. The complete order number and installed-system configuration are required for a responsible replacement decision.
Recommended Models
| DM3110 | WP-700-EB | CA1060-000A1NV010R |
| TSW-1060-LB-B | NBRN - ESGB | QUINT-PS/24DC/24DC/10 |
| 10895S4 | ABB B21 311-100.2CMA100154R1000 | M19D902781G3 |
| TM3XTYS4 TM3-TESYS 4XRJ45 | QFM2160 | 713723H05 KM713720G11 |
| Jung 2005 | 4I4O ZC H142402 | XSL514 |
| NUCPS-HK/1B | SR2 SFT01 | 710-U0086-04P |
| ALM-1 | 46B/44-S12 PN:50106546 | HT-9001-URW |
| BST-ET14 | KFD2-SOT2-Ex1.LB.IO | SC90 SC 90AF021 |
| 67CFR-600/VS 250PSI/0-60PSI | Times-7 A1001 PN: 71203 | Mbs300 060G1107 |
| ABB UMC100.3 AC24L 1SAJ530000R2100 | HELVAR 910 V.4.2.25 | GD250W4N |
