Siemens 6SL3130-7TE31-2AA3 is a 120 kW SINAMICS S120 Active Line Module for a 380-480 V three-phase line. It regulates the modular drive DC link, supports regenerative energy flow and includes a DRIVE-CLiQ cable for system integration.

Manufacturer	Siemens
Order Number	6SL3130-7TE31-2AA3
Product Family	SINAMICS S120
Module Type	Active Line Module
Nominal Line Input	3-phase 380-480 V AC
Permissible Line Range	342-528 V AC
Line Frequency	47-63 Hz
Rated Infeed / Regenerative Power	120 kW
S6 Infeed / Regenerative Power	145 kW
Maximum Infeed / Regenerative Power	175 kW
DC-Link Output	600 V DC
Rated DC-Link Current	200 A
S6 DC-Link Current	244 A
Maximum DC-Link Current	292 A
Rated Input Current at 400 V	182 A
Matching Active Interface Module	6SL3100-0BE31-2AB0
Construction	Booksize
Cooling	Internal air cooling
Degree of Protection	IP20 / UL open type
Lifecycle	PM300 Active Product

• Provides the regulated line-side infeed for a modular SINAMICS S120 DC link.
• Supports rated regenerative feedback at the same 120 kW class when the complete Active Line configuration is engineered correctly.
• Delivers a rated 200 A at the 600 V DC link, with separately documented S6 and maximum current levels.
• Integrates internal forced-air cooling in the 300 mm booksize power section.
• Uses DRIVE-CLiQ communication and is supplied with the corresponding system cable.

• Operates with Active Interface Module 6SL3100-0BE31-2AB0 and the Siemens-specified line-side components.
• The associated cabinet must support the documented internal-airflow path and 300 mm module width.
• Line protection, conductor sizing, grounding and DC-link busbar capacity must suit the 120 kW current class.
• The 2AA3 suffix must be retained in the drive project, nameplate record and spare-parts request.
• Compatibility must be checked for the installed Control Unit, firmware and complete S120 topology.

• Siemens lists this exact order number as a PM300 Active Product; no lifecycle replacement is required for ordinary spare planning.
• An externally cooled 6SL3131 article is a different mechanical variant and must not be substituted without cabinet engineering.
• A Smart Line Module does not duplicate the regulated regenerative behavior of an Active Line Module.
• Preserve the matching Active Interface Module and line-side design when exchanging the unit.
• Commission the line infeed, DC-link regulation, regenerative path and connected axes after replacement.

What is the rated infeed power of 6SL3130-7TE31-2AA3?

The rated infeed and regenerative power is 120 kW.

What DC-link current does this Active Line Module supply?

It provides 200 A at the rated 600 V DC-link operating point.

Which Active Interface Module is paired with this 120 kW unit?

Siemens pairs it with 6SL3100-0BE31-2AB0.

Does the module use internal or external air cooling?

This 6SL3130 variant uses internal air cooling.

What cabinet width is required for the power section?

The module width is 300 mm; its full documented dimensions are 300 x 629 x 270 mm.

Is 6SL3130-7TE31-2AA3 an active Siemens product?

Yes. Siemens lists the exact order number as a PM300 Active Product.