Siemens 6SL3162-0AM00-0AA0 SINAMICS S120 Replacement Fan
A maintenance spare for the cooling system of documented 300 mm SINAMICS S120 Line and Motor Module configurations.
Product Profile
6SL3162-0AM00-0AA0 is a Siemens replacement fan, not a DC-link adapter or a power-conversion module. It is a service component for 300 mm SINAMICS S120 Line and Motor Module constructions covered by the applicable equipment documentation.
Siemens catalog data associates the fan with 300 mm Motor Module current classes of 132 A and 200 A. The exact host article and its service procedure must be confirmed before ordering or fitting the spare.
Technical Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3162-0AM00-0AA0 |
| Product Family | SINAMICS S120 |
| Product Type | Replacement cooling fan |
| Service Scope | 300 mm Line and Motor Module constructions |
| Documented Motor Module Classes | 132 A and 200 A |
| Installation Purpose | Restoration of the supported module cooling-air path |
| Electrical Interface | Defined by the exact host module service arrangement |
| Mechanical Fit | Verify against the complete host article number before installation |
| Replacement Method | Follow the host module equipment and service instructions |
System Role
- Restores forced-air movement through the supported module after the installed fan reaches its service limit or fails.
- Supports temperature control of the host power section but does not change the module's electrical rating or function.
- Serves as an article-specific maintenance spare within the wider SINAMICS S120 booksize service portfolio.
- Requires the host module to be safely isolated before the cooling assembly is accessed.
Compatibility
- Confirm a 300 mm host construction and the complete Siemens article number before treating the fan as compatible.
- Check whether the host is a documented Line Module or one of the supported Motor Module current classes.
- Do not infer compatibility from connector appearance, fan diameter or S120 family name alone.
- Use the equipment manual for access sequence, fastening, cable routing and post-installation inspection.
- Keep narrower 50 mm, 100 mm, 150 mm and 200 mm module fan spares separate from this article.
Applications
- Planned preventive maintenance for supported 300 mm SINAMICS S120 power modules.
- Corrective repair where diagnostics or inspection identify a failed host-module cooling fan.
- Service stock for facilities operating the documented 132 A or 200 A Motor Module constructions.
- Drive-cabinet refurbishment that retains the original compatible power module.
FAQ
Is 6SL3162-0AM00-0AA0 a DC-link adapter?
No. Siemens identifies it as a replacement fan for supported 300 mm S120 modules.
Which Motor Module current classes are documented?
The catalog associates it with 132 A and 200 A Motor Module constructions in the 300 mm width.
Can the fan be selected from cabinet dimensions alone?
No. The full host article and the relevant service documentation must be checked.
Does installing this spare increase drive power?
No. It restores the intended cooling function and does not alter the host module rating.
What must happen before fan replacement?
The drive system must be isolated and the host module service procedure followed.
What information should be sent with an enquiry?
Provide the complete host-module article, module width, current class, installed fan article and equipment photos when available.
Recommended Models
| 2250-R5D6S1 | FC-TSDI-1624 | PMM33-301-MD1 |
| HLPB04S | LP-FXPM263-0 | ST-20 |
| ABB 6131/20-24-500 2CKA006132A0342 | 7266A | BMXXBP0800 |
| 2TMA020070N0006 | QAM9120.040 | 1C31227G01 |
| HD-TX-301-CE | GPSK-1 513020 | 1KGT004700R5011 |
| ABB 1SAP240000R0001 | PXC22-D | effector200 OG 5121 OG5121 |
| 8013/22-02-43 | EXD5314CE | K1400 EN60669-2-1 |
| 6GK5108-0BA00-2AA3 | WS8B4WB/U | CC-5 500-633037 |
| T2G-D3D-IF | RCDT320 | DIN-HUB |
| 20-0268-40 | BT-F425 | EK1100 |
