Siemens 6SL3210-1PE24-5AL0 SINAMICS PM240-2 Power Module
A frame-size FSD power module rated for 22 kW low-overload and 18.5 kW high-overload applications.
Product Overview
6SL3210-1PE24-5AL0 is a SINAMICS PM240-2 modular power stage for three-phase 380 to 480 V systems. The article provides a Class A input filter and an integrated braking chopper in the FSD enclosure.
Its ratings are 22 kW for low-overload duty and 18.5 kW for high-overload duty. The required compatible control unit supplies the drive intelligence and communications.
Performance
- Delivers 22 kW low-overload operation across the stated -20 to +40 °C ambient range.
- Supports 18.5 kW high-overload service up to +50 °C for loads with higher intermittent torque demand.
- Uses the integrated braking chopper for controlled deceleration with a separately engineered resistor.
- Moves 0.055 m³/s of cooling air through the FSD power stage.
- Carries the IE2 efficiency-class designation for the documented operating point.
Technical Details
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1PE24-5AL0 |
| Product Family | SINAMICS G120 PM240-2 |
| Input Supply | 3 AC 380–480 V, +10 / -20%, 47–63 Hz |
| Low-Overload Rating | 22 kW |
| High-Overload Rating | 18.5 kW |
| Input Filter | Integrated Class A filter |
| Braking Chopper | Integrated |
| Frame Size | FSD |
| Protection | IP20 without control unit or operator panel |
| Control-Unit Requirement | Compatible control unit, firmware V4.7 HF8 or later |
| Cooling Airflow | 0.055 m³/s |
| Installation Altitude | Up to 1,000 m without derating |
| Efficiency Class | IE2 |
| Lifecycle | Active product |
System Integration
- Match the control unit to the required fieldbus, I/O and safety functions while observing the minimum firmware release.
- Engineer cabinet ventilation for the FSD airflow and ensure service access for the 17.50 kg module.
- Coordinate the line reactor, protection, braking resistor and EMC bonding with the complete drive installation.
- Check motor current and overload duty rather than selecting only from the 22 kW headline rating.
- Keep the validated control-unit parameter backup with the motor and machine commissioning record.
Applications
- Industrial pumps and fans requiring a 22 kW low-overload power stage.
- Conveyors, mixers and processing machines using the 18.5 kW high-overload rating.
- Modular G120 panels with Class A filtering and dynamic-braking requirements.
- Drive retrofits where the FSD mechanical envelope and V4.7 HF8 control-unit compatibility are already established.
FAQ
How does 6SL3210-1PE24-5AL0 differ from the 1PE23-8AL0 article?
This article raises the duty ratings to 22 kW low overload and 18.5 kW high overload while retaining the FSD envelope.
Is a braking chopper included?
Yes. A correctly rated external braking resistor is still required when braking energy must be dissipated.
What is the minimum stated control-unit firmware?
Use a released control unit with firmware V4.7 HF8 or later.
Does the IP20 rating include a control unit and panel?
The IP20 statement applies to the power module without the control unit or operator panel.
Which weight should be used for technical planning?
The technical data gives a net weight of 17.50 kg.
What information prevents a rating mix-up?
Keep the exact 1PE24-5AL0 number together with the motor current and the intended overload class.
Recommended Models
| XM30 X13651469-01 | 3RP1540-1AJ30 | PDLPC416-KNX |
| 37104491000 | SC90 SC 90AF021 | S9231AW |
| 101 4K 60-1739-01 | LS1000R | 3280007-12 |
| LV429120 NSX100-250 3P3DMA100 | ABB TA25DU-25 TA25DU25 1SAZ211201R1051 | 1783-MS10T |
| 025-39956-000 | TCIDL1 | CES-A-UEA-04B 097075 |
| REG-K/4x/6 MTN646704 | PM554-T A0 ABB 1TNE968900R0100 | C-Bus2 L5504RVF20 |
| 5X829N | ABB/BBC DD370A GJR2 237400 | HD251X 620TVL |
| ABB LS40P13B11 | G12MFS/HP/NA 10000PSI | WSU26/3-103A00/1047985 |
| V61R513A-A2000 | TA2DT4 | ABB STD-500MA 6593-102-500 |
| AP-MWS3A-KNX CP330026 | 15B10848G1 / 15H50542 | CAT5e/6/7 |
