Siemens 6SL3210-1PE26-0AL0 SINAMICS G120 PM240-2 Power Module
A 30 kW low-overload PM240-2 power module with integrated Class A filtering and a built-in braking chopper.
Technical Summary
6SL3210-1PE26-0AL0 is a SINAMICS G120 PM240-2 power stage for three-phase 380 to 480 V systems. The FSD module combines a Class A input filter and an integrated braking chopper in one modular drive component.
The article is rated for 30 kW low-overload duty or 22 kW high-overload duty. A compatible SINAMICS Control Unit supplies the application control, communication and parameter functions.
Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1PE26-0AL0 |
| Product Family | SINAMICS G120 PM240-2 |
| Input Supply | 3 AC 380-480 V, +10 / -20%, 47-63 Hz |
| Low-Overload Rating | 30 kW; 150% for 3 s and 110% for 57 s |
| High-Overload Rating | 22 kW; 200% for 3 s and 150% for 57 s |
| Input Filter | Integrated Class A filter |
| Braking Chopper | Integrated |
| Frame Size | FSD |
| Protection | IP20 / UL open type without Control Unit or panel |
| Operating Temperature | -20 to +40 °C (LO); -20 to +50 °C (HO) |
| Cooling Air Requirement | 0.055 m³/s |
| Control-Unit Release | Firmware V4.7 HF8 or later |
| Efficiency Class | IE2 |
| Lifecycle | Active product |
Features
- Provides the motor power stage for a modular SINAMICS G120 converter.
- Integrates Class A filtering for the defined article configuration.
- Uses a built-in braking chopper with an externally engineered braking resistor.
- Supports separate low-overload and high-overload duty profiles.
- Uses internal forced-air cooling in the FSD enclosure.
Compatibility
- Use with a released SINAMICS Control Unit at firmware V4.7 HF8 or later.
- Match the motor current, power, overload profile and supply voltage to this exact power stage.
- Verify the cabinet space for the 472 x 200 x 237 mm FSD envelope and the required cooling clearances.
- Select the braking resistor, line protection and conductors from the approved PM240-2 engineering data.
- Retain the complete AL0 suffix because it identifies the filtered variant.
Replacement
- Back up the Control Unit parameters and record the installed motor data before removal.
- Confirm the full 6SL3210-1PE26-0AL0 order number rather than selecting by power alone.
- Inspect protective-earth, shield, line, motor and braking-resistor connections before transfer.
- Restore the approved cooling clearances and verify unobstructed airflow.
- After commissioning, check direction, current, braking, alarms, temperature and EMC performance.
FAQ
What power ratings apply to 6SL3210-1PE26-0AL0?
Siemens specifies 30 kW for low-overload duty and 22 kW for high-overload duty.
Does this article include an EMC filter?
Yes. The AL0 configuration includes an integrated Class A filter.
Is a braking chopper included?
Yes. A braking resistor must still be selected and installed for the actual duty.
Are the Control Unit and operator panel included?
No. The IP20 power module is supplied without those components.
Which mechanical frame is used?
The module uses frame size FSD and measures 472 x 200 x 237 mm.
What should be preserved during replacement?
Keep the parameter backup, full order number, motor data, wiring records and braking configuration together.
Recommended Models
| F261MAH-V01 | R7847 C 1005 | HD-RX-201-CE |
| DLC-MASTER | DAC-1180 | KX41L |
| ID22W00TCH300 | PSD1001C | VZ0008.BD4 |
| LDK/10 | 650-3600 650-3660P | ABB 1RK 221052-AH |
| DTK-120HW | HCPS.9-2508W | IA-MM-TPD |
| LR2D3559 | VT5400 | DKG-307 |
| W1-S35 | BWC3-H | MC3 |
| 05D0-05DR-D | RM8I KNX 4940215 | FMI-100BU |
| ABB 1SD AO 13783 R1 | 5714A | GE PQMII-T20-CA |
| HW100 | 100Base-T | ESW205-T |
