Siemens 6SL3210-1PE26-0UL0 SINAMICS G120 PM240-2 Power Module
A 30 kW low-overload PM240-2 power module with a built-in braking chopper and no integrated input filter.
Technical Summary
6SL3210-1PE26-0UL0 is the unfiltered FSD version of the SINAMICS G120 PM240-2 power module. It accepts a three-phase 380 to 480 V supply and provides the converter power stage for a compatible Control Unit.
The article is rated for 30 kW in low-overload duty and 22 kW in high-overload duty. Its integrated braking chopper supports dynamic-braking designs that use the correctly engineered external resistor.
Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1PE26-0UL0 |
| Product Family | SINAMICS G120 PM240-2 |
| Input Supply | 3 AC 380-480 V, +10 / -20%, 47-63 Hz |
| Low-Overload Rating | 30 kW; 150% for 3 s and 110% for 57 s |
| High-Overload Rating | 22 kW; 200% for 3 s and 150% for 57 s |
| Input Filter | Not integrated |
| Braking Chopper | Integrated |
| Frame Size | FSD |
| Protection | IP20 without Control Unit or panel |
| Operating Temperature | -20 to +40 °C (LO); -20 to +50 °C (HO) |
| Cooling Air Requirement | 0.055 m³/s |
| Control-Unit Release | Firmware V4.7 HF8 or later |
| Lifecycle | Active product |
Features
- Delivers variable-frequency motor power under commands from the fitted Control Unit.
- Provides a built-in braking chopper for a correctly selected external braking resistor.
- Supports 30 kW low-overload and 22 kW high-overload application profiles.
- Uses the FSD mechanical format with internal forced-air cooling.
- Leaves EMC filtering to the engineered external installation.
Compatibility
- Use a released SINAMICS Control Unit at firmware V4.7 HF8 or later.
- Engineer external EMC measures because this UL0 article has no integrated input filter.
- Match supply, motor current, overload duty, braking requirements and cabinet cooling.
- Reserve the exact FSD footprint and maintain the specified airflow path.
- Do not replace the UL0 unit with an AL0 unit without reviewing the complete EMC and cabinet design.
Replacement
- Record the unfiltered UL0 suffix and the installed external EMC components.
- Back up Control Unit parameters and motor data before isolating the drive.
- Check the braking-resistor circuit and protective devices against the documented duty.
- Re-establish shielding, grounding and conductor routing in the original engineered arrangement.
- Verify motor direction, current, braking, alarms and temperature after commissioning.
FAQ
What distinguishes 6SL3210-1PE26-0UL0?
It is the unfiltered 30 kW low-overload PM240-2 variant in frame size FSD.
What is the high-overload rating?
Siemens specifies 22 kW for high-overload duty.
Does the 6SL3210-1PE26-0UL0 include a braking chopper?
Yes. The external braking resistor is a separately engineered component.
Is an input filter integrated in the 6SL3210-1PE26-0UL0?
No. External EMC measures must be designed for the installation.
Which Control Unit firmware is required for the 6SL3210-1PE26-0UL0?
The product record states firmware V4.7 HF8 or later.
What suffix must be checked during replacement?
Retain UL0 because it distinguishes the unfiltered construction.
Recommended Models
| 5363 EV45 | 1747-AIC SLC500 DH-485 | 2TMA020070N0006 |
| Allen Bradley 1747-L532 | TIOC-555 17-505555-001B | TXM1.8D |
| 6GK5216-0BA00-2AA3 | Merten 648493 | D05F-1/2A |
| 251204-AN | 3-PPS/M-230 2990108 | AEA4212PB00 |
| RMG8S KNX 4930220 | CCT15244 | AC53.602.0E AC5360B.0Z |
| 114DR-CJ-900-000 | CPO-FBA-4A | AFP23407 FP2-Y64T |
| KFD2-CRG2-1.D | 802140 | ST-20 |
| CLIOL821A | 4000016-015 | PB21A30004000 |
| ARD-CPU-RM A1110014 | M2150-2DBC | PAA2-4HVA-070 |
| LV434010 | Model2 71900 | 505C806G13 A200 SZ 00-1 |
