6SL3210-1PE32-1AL0 is a filtered frame-size FSF SINAMICS G120 PM240-2 power module. It integrates a Class A EMC filter and braking chopper in the power stage while the selected Control Unit provides drive control and communications.

Its published duty ratings are 110 kW for low overload and 90 kW for high overload. The complete AL0 suffix is important because it separates this article from the unfiltered 6SL3210-1PE32-1UL0.

• Rated output current is 205 A in low-overload duty and 178 A in high-overload duty.
• Maximum output current is 356 A for the documented short-duration overload condition.
• Low-overload duty permits 150% for 3 seconds and 110% for 57 seconds in a 300-second cycle.
• High-overload duty permits 200% for 3 seconds and 150% for 57 seconds in a 300-second cycle.
• The FSF module uses 0.153 m³/s of internal cooling airflow.

• Select the Control Unit for the required control mode, communication bus, I/O and safety functions.
• Verify the integrated Class A filter against the required EMC category, cable length and cabinet arrangement.
• Engineer the external braking resistor from the machine deceleration cycle and the built-in chopper limits.
• Maintain airflow and service clearances around the 708 × 305 × 357 mm FSF housing.
• Coordinate line protection, motor cable, grounding and parameter commissioning as a complete drive system.

• 110 kW low-overload pump and fan drives.
• 90 kW high-overload conveyors, mixers and industrial processing equipment.
• Drive cabinets requiring the integrated Class A filter of the AL0 article.
• G120 modernization projects where the existing FSF mechanical and electrical interfaces are confirmed.