6SL3210-1PE33-7AL0 is a SINAMICS G120/S120 PM240-2 power module in frame size FSG. It combines an integrated Class C2 EMC filter and braking chopper with a three-phase 380 to 480 V power stage.

Its two duty ratings distinguish 200 kW low-overload operation from 160 kW high-overload operation. The module is supplied without a Control Unit or operator panel, which are selected as part of the complete drive system.

• Rated output current is 370 A for low-overload duty and 302 A for high-overload duty.
• Peak output capability reaches 604 A within the documented overload cycle.
• High overload supports 200% for 3 seconds and 150% for 57 seconds within the stated 300-second cycle.
• Low overload supports 150% for 3 seconds and 110% for 57 seconds within the stated 300-second cycle.
• Internal forced-air cooling requires 0.210 m³/s of cabinet airflow.

• Pair the FSG power module with a supported SINAMICS Control Unit and the firmware level released for this article.
• Engineer line protection, conductor sizes, motor cable and cabinet heat removal for the 200/160 kW duty point.
• Connect a correctly rated external braking resistor only through the documented braking circuit.
• Apply the installation measures required for the integrated C2 filter and the project EMC category.
• Verify lifting, mounting and service clearances for the 112.8 kg power module.

• High-power pumps, fans and compressors using the 200 kW low-overload profile.
• Conveyors, mixers and processing machinery requiring the 160 kW high-overload profile.
• Cabinet installations needing an integrated C2 filter in the selected drive architecture.
• Modular G120 or supported S120 systems with separate control and power-stage selection.