6SL3210-1PE34-8CL0 is a frame-size FSG SINAMICS G120/S120 PM240-2 Power Module with an integrated Class C3 EMC filter and braking chopper. It operates from a three-phase 380 to 480 V supply.

The module is rated for 250 kW low-overload duty and 200 kW high-overload duty. The Control Unit and operator panel are separate components in the modular drive architecture.

• Integrated Class C3 filtering defines the EMC variant of 6SL3210-1PE34-8CL0.
• An integrated braking chopper supports a correctly engineered external braking resistor.
• The 740 A peak output supports the documented short-duration overload profile.
• Internal forced-air cooling removes heat from the 250 kW FSG power stage.
• Separate low- and high-overload ratings support different machine torque cycles.

• Pair the power module with a supported SINAMICS Control Unit and released firmware.
• Keep the Class C3 EMC selection consistent with the cabinet, cable and installation category.
• Select line protection, conductors, motor cable and braking resistor from the FSG current and overload data.
• Provide lifting and service access suitable for the 1000 × 305 × 357 mm module.
• Verify the Control Unit, panel and option modules separately because they are not included with the power stage.

• Use the full 6SL3210-1PE34-8CL0 identifier so the Class C3 filter variant is not confused with the adjacent suffix.
• Confirm whether the machine uses the 250 kW low-overload or 200 kW high-overload profile.
• Back up parameters and record the Control Unit firmware, motor data and braking circuit before exchange.
• Verify cabinet airflow, mounting dimensions, lifting provisions and cable terminations.
• Recommission the motor data and functional checks before returning the drive to production.