SINAMICS S120 | FSC internally cooled power stage
Siemens 6SL3210-1SE22-5AA0 SINAMICS S120 PM340 11 kW Filtered Power Module
A filtered 11 kW blocksize power module with 25 A rated output current for modular SINAMICS S120 drive systems.
BrandSiemens
Model6SL3210-1SE22-5AA0
Product TypeSINAMICS S120 PM340 11 kW Filtered Power Module
01
Product Identification
6SL3210-1SE22-5AA0 is a Siemens SINAMICS S120 PM340 Power Module for three-phase 380 to 480 V supplies. The AA0 suffix identifies the version with an integrated line filter.
This FSC module is rated at 11 kW, with a separate 7.5 kW high-overload type rating for loads sized by the heavier current profile.
02
Engineering Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1SE22-5AA0 |
| Product Family | SINAMICS S120 / PM340 |
| Input Supply | 3 AC 380–480 V, ±10% |
| Integrated Line Filter | Yes; Category C2 installation with up to 25 m shielded motor cable |
| Rated Power | 11 kW |
| High-overload Power | 7.5 kW |
| Rated Output Current | 25 A |
| High-overload Base Current | 21 A |
| S6 Current, 40% Duty | 27.8 A |
| Peak Current | 38 A |
| Rated Pulse Frequency | 4 kHz |
| Power Loss | 0.30 kW |
| Cooling Air Requirement | 0.038 m³/s |
| Sound Pressure at 1 m | Below 60 dB |
| Rated Input Current | 24.6 A with line reactor / 32.6 A without |
| UL Protection | 35 A Class J, 65 kA SCCR |
| External Braking Resistor | Greater than 56 Ω |
| Maximum Braking-resistor Cable | 15 m |
| Protection / Frame | IP20 or IPXXB; FSC |
03
Functions
- Provides the blocksize AC power stage for a SINAMICS S120 drive axis.
- Operates from a three-phase 380 to 480 V line supply under control of a compatible SINAMICS Control Unit.
- Includes an integrated line filter in the AA0 configuration.
- Supports a connected external braking resistor through the PM340 braking circuit.
- Supplies 25 A rated output current with 38 A peak capability for the documented load cycle.
04
Applications
- 11 kW standard induction-motor drive duties matched to the rated-current profile.
- 7.5 kW applications sized by the high-overload base current.
- Modular SINAMICS S120 machines requiring a compact blocksize power stage.
- Control cabinets that preserve the specified line reactor, filtering, cooling and braking arrangement.
05
Lifecycle
- Keep the complete 6SL3210-1SE22-5AA0 article number because the suffix identifies the filtered AA0 version.
- Before replacement, record the Control Unit, firmware, motor data, parameter set and braking-resistor connection.
- Match the FSC mechanical format, 11 kW rating and documented current profile.
- Verify current product availability and any proposed migration against the installed SINAMICS architecture before ordering.
