6SL3210-1SE24-5UA0 is a Siemens SINAMICS S120 PM340 Power Module for three-phase 380 to 480 V systems. It provides 45 A rated output current and 22 kW rated motor power in a FSD blocksize enclosure.

The 6SL3210-1SE24-5UA0 configuration is a unfiltered UA0 version. Its 18.5 kW high-overload rating, 76 A maximum output current and external braking-resistor connection distinguish the exact power-stage selection.

• Provides the 45 A, 22 kW AC power stage for one SINAMICS S120 drive axis.
• Receives control commands from a compatible SINAMICS Control Unit and supplies the connected three-phase motor.
• No integrated line filter in the UA0 version defines how the power stage participates in the cabinet EMC arrangement.
• Supports the external braking resistor and the documented overload current profile.
• Fits the FSD blocksize mechanical position and requires the stated cooling airflow.

• Confirm the installed SINAMICS Control Unit and firmware before replacing the power stage.
• Keep the UA0 unfiltered selection consistent with the cabinet EMC design.
• Match the FSD format, 45 A rated current, line reactor and 60 a class j, 65 ka sccr protection.
• Use an external braking resistor greater than 27 ω with no more than 15 m of connection cable.
• Retain motor parameters and recommission the axis after the module exchange.

• cabinet designs that provide the required external EMC measures.
• Machines requiring 18.5 kW high-overload motor sizing and a 40 A base-current profile.
• Modular SINAMICS S120 single-axis drive systems controlled by a compatible Control Unit.
• Retrofit work where the installed cabinet is engineered for the FSD PM340 format and the UA0 unfiltered variant.