Siemens 6SL3224-0BE31-5UA0 SINAMICS G120 PM240 15 kW Unfiltered High-overload Power Module
A FSD PM240 power stage with 15.00 kW high-overload duty, 18.50 kW low-overload duty and an unfiltered line input.
Key Information
6SL3224-0BE31-5UA0 is a Siemens SINAMICS G120 PM240 Power Module for three-phase 380 to 480 V AC supplies. It provides 18.50 kW low-overload and 15.00 kW high-overload motor duty in the FSD format.
The module has no integrated filter and an integrated braking chopper. It operates with a compatible SINAMICS G120 Control Unit and the line-side, motor and cabinet components selected for its current class.
Functions
- Provides 38.00 A low-overload current and 32.00 A high-overload current for a modular G120 drive.
- Delivers up to 64.00 A maximum output current under the documented overload profile.
- Uses an unfiltered power-stage configuration together with an integrated braking chopper.
- Uses FSD internal-air-cooled construction with 0.055 m³/s cooling airflow.
- Supports vector-control output frequencies to 200 Hz and V/f output frequencies to 550 Hz.
Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3224-0BE31-5UA0 |
| Product Family | SINAMICS G120 / PM240 |
| Line Supply | 3 AC 380–480 V, ±10%, 47–63 Hz |
| Rated Input Current | 40.00 A with line reactor / 46.00 A without line reactor |
| Rated Power, LO / HO | 18.50 kW / 15.00 kW |
| Rated Output Current, LO / HO | 38.00 A / 32.00 A |
| Maximum Output Current | 64.00 A |
| Rated Pulse Frequency | 4 kHz |
| Output Frequency, Vector Control | 0–200 Hz |
| Output Frequency, V/f Control | 0–550 Hz |
| Integrated Filter | No integrated filter |
| Integrated Braking Chopper | Yes |
| Efficiency | 0.97 |
| Power Factor λ / cos φ | 0.85 / 0.95 |
| Power Loss | 0.42 kW |
| Cooling Air Requirement | 0.055 m³/s |
| Sound Pressure Level at 1 m | 60 dB |
| Operating Temperature, LO / HO | 0–40 °C / 0–50 °C |
| Maximum Motor Cable | 50 m shielded / 100 m unshielded |
| Power Connections | M6 bolt, 10.00–50.00 mm² (AWG 8–1) |
| Degree of Protection | IP20 / UL open type |
| Frame Size | FSD |
Installation
- Use 6SL3224-0BE31-5UA0 with a compatible SINAMICS G120 Control Unit and supported firmware for the installed machine.
- Size the motor and protection for the 38.00 A LO or 32.00 A HO current profile actually used.
- Provide the external EMC measures required by the unfiltered UA0 configuration.
- Keep motor-cable length within 50 m shielded or 100 m unshielded under the documented installation conditions.
- Provide 0.055 m³/s airflow and preserve the FSD mechanical envelope.
Lifecycle
- Siemens lists 6SL3224-0BE31-5UA0 as a spare part with product cancellation effective 1 October 2019.
- Retain the complete 6SL3224-0BE31-5UA0 suffix because it identifies the unfiltered UA0 construction.
- Record the connected Control Unit, firmware, motor data, parameter set and braking circuit before exchange.
- Confirm the FSD dimensions, 13.00 kg handling weight and m6 bolt, 10.00–50.00 mm² (awg 8–1) during retrofit planning.
- Verify protective devices, cable routing, cooling and commissioning under the machine safety procedure.
FAQ
Why is 6SL3224-0BE31-5UA0 identified as an unfiltered PM240?
The UA0 suffix on 6SL3224-0BE31-5UA0 specifies that no line filter is integrated.
Which high-overload rating applies to 6SL3224-0BE31-5UA0?
6SL3224-0BE31-5UA0 provides 15.00 kW and 32.00 A for high-overload duty.
What low-overload capacity is available from 6SL3224-0BE31-5UA0?
6SL3224-0BE31-5UA0 is rated at 18.50 kW and 38.00 A for low-overload operation.
How large is 6SL3224-0BE31-5UA0?
6SL3224-0BE31-5UA0 uses frame FSD and measures 275 × 419 × 204 mm.
What is the handling weight of 6SL3224-0BE31-5UA0?
6SL3224-0BE31-5UA0 has a net weight of 13.00 kg.
What should be reviewed before fitting 6SL3224-0BE31-5UA0?
Confirm external EMC measures, the Control Unit, motor data, braking circuit and cabinet cooling for 6SL3224-0BE31-5UA0.
