Siemens 6SL3255-0AA00-4HA1 IOP-2 Handheld Operator Panel
A handheld Intelligent Operator Panel for parameterization, commissioning and local service of compatible SINAMICS drives.
Product Overview
6SL3255-0AA00-4HA1 is the Siemens IOP-2 Handheld Operator Panel for compatible SINAMICS G120 drive equipment. It combines the IOP-2 interface with a handheld enclosure for commissioning and service at the installed converter.
The panel provides a high-contrast color display and membrane keyboard with a central sensor control field. Its supported operating languages include English, German, French, Italian, Spanish and additional listed languages.
Compatibility depends on the target control unit, firmware and connection arrangement. A handheld panel is an engineering and service interface; it does not replace the saved drive project or approved parameter record.
Performance
Guided commissioning
Supports parameterization and commissioning workflows for compatible SINAMICS equipment.
Local diagnostics
Presents drive status, messages and parameters on the handheld color interface.
Portable service
Allows one panel to be moved between compatible drives under the site access procedure.
Multilingual operation
Provides the manufacturer-listed language set for service teams.
Technical Details
| Manufacturer | Siemens | Exact model | 6SL3255-0AA00-4HA1 |
|---|---|---|---|
| Product designation | IOP-2 Handheld Operator Panel | Display | High-contrast color, 320 × 240 pixels |
| Control surface | Membrane keyboard with central sensor control field | Operating temperature | 0 to 40 °C |
| Transport and storage | −40 to +70 °C | Relative humidity | Less than 95%, non-condensing |
| Degree of protection | IP20 |
Compliance listing |
CE, UKCA, RCM, cULus, EAC and KC-REM-S49-SINAMICS |
About IndustryParts
https://www.industryparts.com/Operator panels are matched to the target drive
IndustryParts keeps the handheld-panel article, Control Unit, firmware and connection evidence together before a service interface is proposed.
- Exact submitted model retained
- Installed-system evidence reviewed
- Quotation identity kept traceable
System Integration
Confirm compatibility
Record the target Control Unit, converter firmware, panel firmware and required connection accessories.
Protect the project
Archive parameters and the approved commissioning record before any write or reset operation.
Close the service session
Verify drive state, remove temporary access, retain changed-parameter evidence and return the panel to controlled storage.
Applications
Drive commissioning
Guided setup and parameter review on compatible SINAMICS G120 equipment.
Maintenance diagnostics
Reading messages and operating values during approved troubleshooting.
Controlled parameter service
Applying authorized changes with an archived before-and-after record.
FAQ
What compatibility details should accompany a 6SL3255-0AA00-4HA1 enquiry?
Provide the target converter and Control Unit MLFBs, firmware versions, connection method and required cable or adapter.
Is 6SL3255-0AA00-4HA1 the same as the panel-mounted IOP-2?
No. This article is the handheld execution; the direct-mount IOP-2 uses a different article number.
Can 6SL3255-0AA00-4HA1 replace a drive project backup?
No. The panel is a service interface; approved parameters and project files must remain under separate configuration control.
What should be checked before moving 6SL3255-0AA00-4HA1 between drives?
Confirm compatibility, access authorization, firmware, saved parameters and the correct operating state for each target drive.
What closes a 6SL3255-0AA00-4HA1 commissioning record?
Retain the final parameter set, cleared diagnostics, functional-test results and the identity of the drive serviced.
Recommended Models
Send the complete 6SL3255-0AA00-4HA1 identity
Include requested quantity, destination and the installed-system evidence needed for compatibility review.
